Hi all, Who is up for a BBQ and dyno day early 2015?? I did one with the 1200 club lads in 2013 and was a good day! Here is a vid of that day- https://www.youtube.com/watch?v=ENZFOOC2OF8

Probably a similar setup with a limit of 12 to 15 cars to keep things relaxed(Datsun's will get first dibs).

I wont have time for tuning, but will log AFR`s and MAP(if boosted).

How's 14th Feb sound? We can show our true feelings to all things Datsun on Valentines day!

Cost will be $15 if you are doing the dyno runs aswell as lunch. Or $5 for lunch only.

Let me know if you will be able to make it, and what car/engine combo you will be running on the dyno so I can put you on the list and get an idea for catering.

Dyno and BBQ:

1- Rat Dat, 1600.............L16 32/36 Weber.
2- Crumb, 1200 Coupe......L20 stroker(2.4lts)
3- Ben, Navara................Z24 32/36 Weber blow through turbo
4- Boofhead, 1200 Sedan...A12 DCOE Webers
5- SBThomo, 1600............L18/20 DCOE Webers
6- Hailest, 1600..............SR20 Turbo
7- Ange, 1200.................Stock A12
8- Rusty, 1600................L18 32/36 Weber
9- Lagwagon, 1000 wag....Stock A12
10
11- Green200b, Hilux.......350Chev
12- Sikyne, 260Z...........L28 IR TB,s EFI

BBQ only:

1-Rat510.....Master Chef
2-Turbo 510..
3
4
5
6
7
8
9
10
11
12

Love to but usually have my kids bday party round then. Need to check with the boss but I'm already In the dog house.

Just be careful of the sausage on val day, it's an acquired taste

Should get the 1600 out... Im in Ballarat myself... What do you drive Sikyne?

_________________

A mate will bring his R33 too...

I'll bring both of these...........................

_________________

I will see if I'm free to bring the 1600 back up for another run. Need to get that dizzy modded. Here was my last run on Sikyne's dyno. http://youtu.be/uCXFhWfO3R8

_________________
Original 77' 260Z 2+2

Hi Rat Dat, I have a 1200 coupe that I race in IPRA (a12 turbo)and a 260z 2 seater that will get club reg next year hopefully! Had a few Datsuns over the years.

Be good to meet a few more local Datto fans

Ah so your "Vic Dyno Hire"?
I could be keen to make the trek for this, although I might be running in the dattos new FJ engine then. I'll know for sure in the next week or so.
Spectators welcome?(if I'm still running it in)

Im keen mate and happy to help out again with running the day wouldn't be able to commit until March but. Bub number 2 is due start of Feb

_________________
120Y 4DOOR SEDAN SR20DE WITH ITB'S

http://datsun1200.com/modules/newbb/vie ... post494892

Yeah, Spectating welcome. I might need a couple of people to give me a hand with the cooking and getting cars on and off the machine as well.

All the best with the new arrival Stu. You never know, you might want to escape the house by then! I am also happy to look at other dates..

I'm happy later Feb early March. I can lend a hand cooking or whatever else simon too.

Yeah you're probably right mate think Raech might not be so keen if I bail a week after bubs is here but

_________________
120Y 4DOOR SEDAN SR20DE WITH ITB'S

http://datsun1200.com/modules/newbb/vie ... post494892

If it is ready I would be keen to bring up my SR20det 1600.

Happy to cook or help with setup too

I know another guy with a 351 Cleveland in his 260z he'd be keen... Yet another Ballarat local

_________________

I'd love to get the coupe on there, it was a great day last time. Would be nice to put a number to the quantity of power it has and finally know.

Should try and get any Ballarat folks down to the next Fuelers show at Masters, just got back from there and there was a total lack of classic Jap stuff

_________________