Ozdat Home Feature Cars Ozdat Classifieds Event Calander Links Trade Link Tech Resource Merchandise Donate Web Mail
It is currently Fri Mar 29, 2024 10:23 am

All times are UTC+11:00




Post new topic  Reply to topic  [ 11 posts ] 
Author Message
PostPosted: Mon Mar 29, 2004 12:36 pm 
Hi all,
Have a L20b in my 1600 and need to replace my engine mounts. I am sure it can't be difficult but just wondering if there is a simple guide on how to do it.
Cheers,
Scott


Top
   
 Post subject:
PostPosted: Mon Mar 29, 2004 4:07 pm 
Offline
User avatar

Joined: Tue Mar 04, 2003 10:18 am
Posts: 749
Location: sydney
Raise engine slightly and support, either with:

Engine hoist - very easy and best way

Block of wood and jack under the sump - a bit dodgy, can squash the sump onto the oil pickup - oil starvation

unbolt one engine mount, replace with new one

be careful when unbolting drivers side mount that you dont short out your spanner on the positive lead on the starter motor... best to disconnect the battery first to make sure

repeat for other side

let engine down

open fridge

grab beer

open beer

drink beer

oops sorry i went a bit far :lol:

_________________
1971 Datsun P510 SR20DET 276 rwkW
2005 Mercedes AMG E55 350 kW
1969 Datsun P510 L20B EFI 95 rwkW
1975 Ford XB Fairmont GS Wagon 179rwhp
1980 Escort Van SR20DET unfinished
2002 Suzuki GSX1300R Hayabusa 185hp


Top
   
 Post subject:
PostPosted: Mon Mar 29, 2004 4:12 pm 
Offline
User avatar

Joined: Mon Sep 08, 2003 12:57 am
Posts: 718
I find that putting the block of wood under the alternator bracket is a bit safer than squashing the sump. You lift one side, replace the mount, drop it down, then repeat for the other side.


Top
   
 Post subject:
PostPosted: Mon Mar 29, 2004 4:17 pm 
Offline
User avatar

Joined: Tue Mar 04, 2003 10:18 am
Posts: 749
Location: sydney
yea what zac said... :D i have an engine hoist so i dont use blocks of wood anyway :lol:

_________________
1971 Datsun P510 SR20DET 276 rwkW
2005 Mercedes AMG E55 350 kW
1969 Datsun P510 L20B EFI 95 rwkW
1975 Ford XB Fairmont GS Wagon 179rwhp
1980 Escort Van SR20DET unfinished
2002 Suzuki GSX1300R Hayabusa 185hp


Top
   
 Post subject:
PostPosted: Mon Mar 29, 2004 6:48 pm 
Offline
User avatar

Joined: Thu Mar 06, 2003 11:30 am
Posts: 365
Location: South Australia
turbovan wrote:
Raise engine slightly and support, either with:
Engine hoist - very easy and best way
Block of wood and jack under the sump - a bit dodgy, can squash the sump onto the oil pickup - oil starvation
unbolt one engine mount, replace with new one
be careful when unbolting drivers side mount that you dont short out your spanner on the positive lead on the starter motor... best to disconnect the battery first to make sure
repeat for other side
let engine down
open fridge
grab beer
open beer
drink beer
oops sorry i went a bit far :lol:
WRONG!!!!
the procedure should START with the beer retrieval process, and end with it :lol: :lol:

_________________
Ben
Adelaide,
South Australia
L28ET 240Z
RB25DET WGNC34 Stagea RS-FourV


Top
   
PostPosted: Mon Dec 18, 2017 8:48 pm 
Offline

Joined: Sun Jul 24, 2016 8:06 am
Posts: 38
Location: Canberra
I'm resurrecting this thread as I bought some new Engine Mounts for my L18 engine'd 1600. They are a good 15mm thicker than the ones removed from the car and I cannot get them to fit!

Have I got the wrong mounts? If so, what are the mounts I need and where can I get them from (does anyone have a part number?)?

Woz

_________________
1972 Datsun 1600
1973 Jaguar XJ6
1988 Renault 5 GT Turbo


Top
   
PostPosted: Tue Dec 19, 2017 12:57 am 
Offline

Joined: Sun Aug 30, 2009 2:51 am
Posts: 42
Location: Bendigo Victoria
You got them on ebay right
I returned mine with photos and told them they don't fit but still they sell them.


Attachments:
[ attachment ]
004.JPG [ 91.25 KiB | Viewed 3519 times ]
[ attachment ]
003.JPG [ 77.33 KiB | Viewed 3519 times ]


Last edited by hkszpower on Fri Dec 22, 2017 1:11 am, edited 1 time in total.
Top
   
PostPosted: Wed Dec 20, 2017 12:22 am 
Offline

Joined: Sun Jul 24, 2016 8:06 am
Posts: 38
Location: Canberra
I’ve ordered a new set from Maddat. Once here I’ll post a picture of the difference. Apparently the thicker
Ones are for a 720?

_________________
1972 Datsun 1600
1973 Jaguar XJ6
1988 Renault 5 GT Turbo


Top
   
PostPosted: Thu Dec 21, 2017 10:22 am 
Offline
Moderator
User avatar

Joined: Sat Oct 30, 2004 2:28 pm
Posts: 5357
Location: Melbourne, Australia
It would be good to see the photos showing the difference!

_________________
1972 Datsun 1600, S14 SR20DET Engineered (204rwkW @ 17psi.)
viewtopic.php?t=6579
#SR20Datsun @SR20Datsun


Top
   
PostPosted: Fri Dec 22, 2017 1:12 am 
Offline

Joined: Sun Aug 30, 2009 2:51 am
Posts: 42
Location: Bendigo Victoria
Done ^


Top
   
PostPosted: Fri Dec 22, 2017 9:01 am 
Offline
Moderator
User avatar

Joined: Sat Oct 30, 2004 2:28 pm
Posts: 5357
Location: Melbourne, Australia
Yep, that's a difference! wow...

_________________
1972 Datsun 1600, S14 SR20DET Engineered (204rwkW @ 17psi.)
viewtopic.php?t=6579
#SR20Datsun @SR20Datsun


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 11 posts ] 

All times are UTC+11:00


Who is online

Users browsing this forum: Google [Bot] and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: 

Powered by phpBB® Forum Software © phpBB Limited