Hi as the topic suggests I have a R31 Pintara and although the speedo works the odometer does not. Can anyone throw some light on what may be done to get it working. Thanks in advance for any help.

I assume it is mechanical and not digital?
Highly likely that the drive gear is stripped inside the speedo.
Apparently, resetting the Odo while moving is a NO NO, it will do just that

_________________
Regards, Graeme
Just trying to help...
http://nissanman.shutterfly.com/
graemes@internode.on.net

Speedo is electric from the box but not sure on how the odometer works off this. I have just recently purchased the car and had the same problem with a Corsair which is only a Nissan. Hoping some one could shed some light on the problem.

Like nissanman says its most likely the odo gears have broken teeth.
My R31 is the same.
Common fault that these and the trip meter stops working.
They get brittle with age...

There may be a seller on eBay that sells replacement cogs for R31s, Holdens and Fords etc?

_________________
910 S3 Bluebird - FJ20ET, E85, IRS, 5 Speed, 4.4 LSD
910 S3 TRX - RB25DET, Coilovers, S13 Front end, Power Steering
RA23 Celica - 18RG, Twin 40mm Webers, Coilovers, rolling on SSR mesh 15x7 0s.

Thanks Imago. Found them on e-bay.