Ozdat Home Feature Cars Ozdat Classifieds Event Calander Links Trade Link Tech Resource Merchandise Donate Web Mail
It is currently Tue Jan 22, 2019 8:46 am

All times are UTC+11:00




Post new topic  Reply to topic  [ 5 posts ] 
Author Message
 Post subject: fj20 dizzy delete
PostPosted: Wed May 16, 2018 9:03 am 
Offline

Joined: Wed May 16, 2018 8:57 am
Posts: 2
Hey guys
Just got my hands on my very first 510 with a fj20 already fitted.
Want to give it a bit of a upgrade with a microtech and new coils, injectors etc..
What have people done with the old dizzy cap? Do they stay or does somebody make a blanking cap of some sorts?
Please bare with me as this is my first time down this track...i have years of experience with the later model nissans but have always wanted to own a clean 1600.
Cheers for your help.


Top
   
 Post subject: Re: fj20 dizzy delete
PostPosted: Wed May 16, 2018 12:20 pm 
Offline
Donating Member
Donating Member
User avatar

Joined: Wed Dec 05, 2007 2:21 pm
Posts: 3186
Location: Blackburn, Victoria.
Firstly, I would suggest that you get something better than a Microtech if you're going to this much effort. There are better options for close to or only slightly more than the cost of a new Microtech.

With the dizzy, when I was running my FJ20 I used the FJ20 dizzy body with E15 turbo Pulsar dizzy internals as a crank angle sensor. This was running a dizzy-controlled spark setup though. Do you have another solution for the crank angle sensor?

_________________
green200b - aka Alistair

The fleet:
'80 200B GX - the green200b - hibernating
'81 RX-7 - 12A extend port, 4.11 Torsen LSD - daily
'74 RX-2 - 13B bridgeport, 4.44 LSD - cruiser
'82 Hilux - 350 Chev, 4.3 Detroit Locker, 33s - 4WD
Dato200B wrote:
Green200B has forgotten more about 200Bs than we will ever know.


Top
   
 Post subject: Re: fj20 dizzy delete
PostPosted: Wed May 16, 2018 12:25 pm 
Offline
Guru
User avatar

Joined: Fri Mar 07, 2003 4:58 pm
Posts: 2635
Location: Adelaide.
I gather you are going to a COP [Coil On Plug] setup?
I am doing the same using LS1 coils.
I have replaced the distributor cap with a stainless steel cap held down by the stock cap clips.
The source?
I bought a bunch of stainless steel measuring cups from a supermarket an one was an exact fit!
Trimmed off the long handle to make a small lip and pop riveted another lip 180 degrees away and voila :)
Attachment:
[ attachment ]
19092016097 (Small).jpg [ 90.84 KiB | Viewed 643 times ]
Attachment:
[ attachment ]
Optical distributor conversion.jpg [ 767.42 KiB | Viewed 643 times ]


Attachments:
[ attachment ]
Optical distributor conversion.jpg [ 767.42 KiB | Viewed 643 times ]

_________________
Regards, Graeme
Just trying to help...
http://nissanman.shutterfly.com/
graemes@internode.on.net
Top
   
 Post subject: Re: fj20 dizzy delete
PostPosted: Wed May 16, 2018 5:32 pm 
Offline

Joined: Tue Mar 11, 2003 11:11 pm
Posts: 2269
You are always one stepping with the creativity Graeme.


Top
   
 Post subject: Re: fj20 dizzy delete
PostPosted: Thu May 17, 2018 9:00 am 
Offline

Joined: Wed May 16, 2018 8:57 am
Posts: 2
That is a brilliant idea with the measuring cups! Il look into that for sure.
As for the CAS i was lead to believe it was a simple "wire in" running the 4X ignitor that the microtech offers? I have emailed micrtech directly and they have assured me this is all i need.
Thanks for all your help,


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

All times are UTC+11:00


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: 

Powered by phpBB® Forum Software © phpBB Limited