hey!
i have just brought a sports steering wheel for my datto (200B) and i have been offered a 180B boss kit, are they the same size?

_________________
"IF YOUR NOT LIVING LIFE ON THE EDGE YOUR TAKIN UP TOO MUCH ROOM"

I Know that, as far as Datsun 1600s are concerned, there are at least 2 different boss kit types. The new boss kits seem to fit most newer steering wheels, whereas the older boss kits are slightly smaller in diameter where they bolt onto the steering wheel and do not fit new steering wheels.

Quickest way is to physically put the steering wheel up against the boss kit bolts or if this is not possible (due to speaking to the seller over the phone), you could ask them to accurately measure the distance between the diagonal holes, but they must be accurate.

New boss kits are about $80 from Supercheap anyway, so you might save some trouble by buying new anyway. Take your steering wheel in.

Don't think there would be any difference between splines of 180B, 200B or 1600, but I could be wrong.

The splines are the same, so if the wheel fits on the boss kit then it will be sweet.

thanks guys.
got the boss yesterday. it has a momo steering wheel on it.. so i think i got a pretty good deal....and yes, it does fit!

_________________
"IF YOUR NOT LIVING LIFE ON THE EDGE YOUR TAKIN UP TOO MUCH ROOM"