OZDAT http://www.ozdat.com.au/forum/ |
|
how to tell if a L18sss or not? http://www.ozdat.com.au/forum/viewtopic.php?t=260 |
Page 1 of 1 |
Author: | Bozo510 [ Wed Apr 23, 2003 9:50 pm ] |
Post subject: | how to tell if a L18sss or not? |
Hey guys, just wondering if anyone could tell me if a L18sss motor had any special marking to show it as a sss? Any help would be muchly appreciated. Also if anyone can tell me the best l20 block and head combination for natural aspirated l series? e.g bluebird block- sss head? thanks Martin |
Author: | DatMad [ Wed Apr 23, 2003 10:20 pm ] |
Post subject: | sss |
you can tell if the head is a SSS head because it has 219 stamped on the front above the water pump, not sure about the bottom end tho, i think they were L18W blocks but thats about it. Maybe someone else can give you a better answer |
Author: | Bozo510 [ Wed Apr 23, 2003 10:26 pm ] |
Post subject: | |
thanks for the help dude, im looking at getting the motor but im interested more in the head being a sss than the block. |
Author: | DatMad [ Wed Apr 23, 2003 10:30 pm ] |
Post subject: | |
well that should help then, but it'd be just as easy to get an A87 head in good nick and have it ported and polished and decked a bit, i mean SSS heads are good but you can still do better to em depending on the induction and cam your running. SSS head arent easy to come by i dont think |
Author: | Chris G [ Thu Apr 24, 2003 1:45 am ] |
Post subject: | |
Just be aware that some A87 heads are open chamber, and some are closed chamber. I've got one of each ! The closed chamber A87 are pretty well identical in spec to the SSS head, and you'll find them mostly on L18s and the occaisional L20b, although the open chamber A87 I have is from an L20b. Cheers, |
Page 1 of 1 | All times are UTC+11:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |