Hi
I am looking at using the Tempe tyre 15inch Simmons b45s on my car. I'm just wondering if anyone has had experience with a custom offset, what is the widest rim with tyre you can run on the rear of a Datsun 1600 with standard wheel arch and no flaring.
I'm also running r31 disk brake conversion. any information would be appreciate
Tim

Did tempe start re making b45's and rims under 17" i was told they wouldn't re make anything under a 17

There have been a fair few who have asked this question previously:
I found them using the search function:
http://www.ozdat.com/forum/viewtopic.ph ... re+on+1600
http://www.ozdat.com/forum/viewtopic.ph ... +rear+1600
http://www.ozdat.com/forum/viewtopic.ph ... +rear+1600
http://www.ozdat.com/forum/viewtopic.ph ... +rear+1600
etc.
Search and you shal find!

_________________
1972 Datsun 1600, S14 SR20DET Engineered (204rwkW @ 17psi.)
viewtopic.php?t=6579
#SR20Datsun @SR20Datsun

Tim,
I have 17x8 +28 on the rear of my 1600. They just fit with standard arms and rolled guards,R31 brakes, low height with about 2 degrees neg camber from an adjustable rear crossmember.
Your camber adjustment will have some effect as to what the ideal offset is.
I would definitely recommend measuring - especially if you're buying Simmons as they will give you whatever offset you ask for.

Hi sutho, on the website it says they still makin them but in 5 stud pattern thanks for the info mate
Tim