According to page WT-2 of the aforementioned good book, the offset is 30mm, positive I assume
| OZDAT http://www.ozdat.com.au/forum/ |
|
| 200b steel wheel offset? http://www.ozdat.com.au/forum/viewtopic.php?t=34696 |
Page 1 of 1 |
| Author: | unfamilia [ Thu Dec 21, 2017 1:06 pm ] |
| Post subject: | 200b steel wheel offset? |
Can't find much info but does any one with a 200b factory service manual have the specs on the 14x5 inch factory steel wheel offsets? Thanks |
|
| Author: | Nissanman [ Thu Dec 21, 2017 3:01 pm ] |
| Post subject: | Re: 200b steel wheel offset? |
According to page WT-2 of the aforementioned good book, the offset is 30mm, positive I assume
|
|
| Author: | unfamilia [ Thu Dec 21, 2017 4:33 pm ] |
| Post subject: | Re: 200b steel wheel offset? |
Many thanks. Hope that's for the 4 slot steel cut out ones. |
|
| Page 1 of 1 | All times are UTC+11:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|