OZDAT
http://www.ozdat.com.au/forum/

L18e onto L16
http://www.ozdat.com.au/forum/viewtopic.php?t=21772
Page 2 of 3

Author:  jrh001 [ Tue Dec 07, 2010 9:58 pm ]
Post subject:  Re: L18e onto L16

KenyDat wrote:

Silvia_S110, this topic is still active. Please post all the photos.
Would pics of an L24E EFI set up be of any use? Can post some if it will help.

JohnH

Author:  SIX-TEN [ Wed Dec 08, 2010 9:07 am ]
Post subject:  Re: L18e onto L16

^^^ I think the setup on the L24Es are the same just have a longer manifold for the two extra cylinders.

So yeah post up my friend...

Author:  jrh001 [ Thu Dec 09, 2010 3:25 pm ]
Post subject:  Re: L18e onto L16

Checked the throttle body, it's different to R30.

yours:
[ img ]

R30:
[ img ]

One one vacuum connector, which is on the same line as the vac advance on the distributor.
One electrical connector, not sure what it does, but it disappears into the EFI wiring harness.
Throttle position sensor looks similar.

JH

Author:  KenyDat [ Wed Jan 19, 2011 2:28 am ]
Post subject:  Re: L18e onto L16

Let me mention that I found out that this system is Califonia set up. It has EGR componets & connections that I am ommiting.
Under the throttle unit, only one line that connetcts to the distributor is being used. the rest are being blocked.

Author:  unlimitedpower [ Wed Jan 19, 2011 6:26 pm ]
Post subject:  Re: L18e onto L16

I thought that would be the case.
Delete all the sh*t you don't need these things are so simple they will practically run by them selves.

Author:  KenyDat [ Wed Jan 19, 2011 8:02 pm ]
Post subject:  Re: L18e onto L16

unlimitedpower wrote:
I thought that would be the case.
Delete all the sh*t you don't need these things are so simple they will practically run by them selves.
That is exactly whats is happening. Hoping to have it running very soon.

Watch this space!

Author:  KenyDat [ Mon Aug 29, 2011 3:27 pm ]
Post subject:  Re: L18e onto L16

I have been working on this L18e onto L16 project for quite sometime. But in the last couple of days I had time on my hands and the results....

[ img ]
Not the cleanest engine bay..... :(


Its running
[ img ]

Sounds loud due to exhaust flange not fitting properly, but gun gum took care of that

Author:  unfamilia [ Sun May 27, 2012 10:23 pm ]
Post subject:  Re: L18e onto L16

Can stock heads be drilled to fit these manifolds? I see they have only 1 hole in the top to mount rather than 2 on carby heads and manifolds

Author:  old-tin [ Sun May 27, 2012 10:43 pm ]
Post subject:  Re: L18e onto L16

Yes but you need to cut slots in the head for the injector aswell

Author:  unfamilia [ Sun May 27, 2012 11:53 pm ]
Post subject:  Re: L18e onto L16

Not if it's straight lpg ;)

Author:  famous [ Sat Mar 26, 2016 6:38 pm ]
Post subject:  Re: L18e onto L16

Hey guys I'm new to the crew an following in the footsteps of kenydat. All the essential items are on and pretty much straight forward only a butchered wiring loom is leaving me scratching my head. any one got a wiring diagram and ecu pin out?

Author:  unlimitedpower [ Sat Apr 09, 2016 8:19 am ]
Post subject:  Re: L18e onto L16

I have factory wiring diagrams for the L18E in the S110 silvia i will post up later.

Author:  KenyDat [ Tue Jun 07, 2016 5:48 pm ]
Post subject:  Re: L18e onto L16

famous wrote:
Hey guys I'm new to the crew an following in the footsteps of kenydat. All the essential items are on and pretty much straight forward only a butchered wiring loom is leaving me scratching my head. any one got a wiring diagram and ecu pin out?
Sorry famous for not responding to this earlier. I do not have the wiring diagram for the L18E injection system. However I used a troubleshooting book for an injected Datsun Z; L28E as a guide to know which wire goes & does what though my EFi wiring loom was intact. I can look for the pdf link and share is interested.

The car is a shell at the moment. Its under a slow restore.....

Author:  unlimitedpower [ Sun Jul 17, 2016 6:34 pm ]
Post subject:  Re: L18e onto L16

[ img ]

Sorry its a bit sh*t, Scanner at work was broken

Author:  unlimitedpower [ Sun Jul 17, 2016 6:35 pm ]
Post subject:  Re: L18e onto L16

[ img ]

[ img ]

[ img ]

[ img ]

[ img ]

Page 2 of 3 All times are UTC+11:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/