OZDAT
http://www.ozdat.com.au/forum/

LAG 510's 1600 sr20det forged twin scroll twin gate goodness
http://www.ozdat.com.au/forum/viewtopic.php?t=10308
Page 5 of 34

Author:  LAG_510 [ Wed Aug 22, 2007 7:34 pm ]
Post subject: 

Thanks for all the well wishes fellas, i reckon i'm very lucky to not have bent it worse and that all i had was a sore neck!

video is being loaded onto youtube as we speak...

Author:  LAG_510 [ Wed Aug 22, 2007 10:32 pm ]
Post subject: 

ok...

one of my laps
http://www.youtube.com/watch?v=QhoWtT8Co_s

and the stack
http://www.youtube.com/watch?v=Qv4sEL-PIIY

Author:  Stoney [ Wed Aug 22, 2007 10:59 pm ]
Post subject: 

sh*t!, very unlucky yet lucky at the same time, never good to see that happen to any car

good luck with the repairs

Author:  simarkbotak [ Wed Aug 22, 2007 11:11 pm ]
Post subject: 

Nevertheless.. Nice driving.. :wink: If it weren't for the locked rear right brakes.. or was it both?

Anyways, I had a crash when my datto was just barely done.. :( but, everything has gone uphill since it has been fixed..:D :wink:

What tires did you run in LAG?

Cheers,

Mark

Author:  LAG_510 [ Mon Aug 27, 2007 10:03 pm ]
Post subject: 

i was running yoki a048 rear and dunlop formula r front. Car is at the panel shop now getting the front straightened then i am going to get it back on the road with some panels i have managed to source, thanks ben (2door510)

I know its a stretch but if anyone has a nice drivers side guard for a reasonable price :lol: pm me as the one i have is kinda ' just for now.

Author:  LAG_510 [ Wed Aug 29, 2007 7:17 pm ]
Post subject: 

Well i ended up biting the bullet and buying a radiator to butcher up to make a nice fitting custom unit. I made the tanks out of sheet metal, bending it the old fashioned way and will be getting it welded up soon.

I will be getting the car back from the panel beaters tomorrow, mick (one of the ozdat originals!) from micolour looked after me as he has done in the past and straightened out the front for me, now i have to work on the panels and spray it all up.

I also bought some new injectors today so i'll be able to actually boost the thing! they are 630cc (at factory fuel pressure) siemens top flows, i am in the proccess of fabricating the new rail and fittings.

[ img ]

[ img ]

[ img ]

Author:  simarkbotak [ Wed Aug 29, 2007 7:51 pm ]
Post subject: 

Looking really good there LAG, good to see some quick progress.. :wink:

Author:  1600 head [ Tue Sep 25, 2007 7:46 pm ]
Post subject: 

hey leigh any progress ????

Author:  LAG_510 [ Fri Oct 19, 2007 6:35 pm ]
Post subject: 

well progress is slow on the onld girl but thought i'd put up a little update. installed some HKS step 1 cams today and am currently working on a top feed injector and rail combo to suit the 630cc injectors i bought. i'm hoping with the cams and some more boost i'll be looking at around 200rwkw. still can't decide on what turbo to get! body is going to a panel shop in the next few weeks.

[ img ]

Author:  Ryan1600 [ Mon Jan 14, 2008 1:53 am ]
Post subject: 

any progress leigh?

Author:  LAG_510 [ Fri Jan 25, 2008 12:13 am ]
Post subject: 

well progress has been slow but gradual. i'm now upgrading the fuel system, running new 3/8" alloy lines, braided flexible lines with -6 fitting to the fuel rail i finally installed today. a spacer had to be machined and posts made as well as the injector bosses milled into the rail extrude. the ends were then tapped to take fittings and whalah!

[ img ]

[ img ]

[ img ]

[ img ]

also here are a few shots of my current rear end. R180 locked 3.9 ratio with cv shafts and r30 arms running 300zx slotted disks and r30 calipers. The shocks are custom made Koni adjustable coilovers. the setup will be ditched when i finish my five stud version with short nosed GTR helical LSD. the last pic shows the GTR centre vs an R180...

[ img ]

[ img ]

[ img ]

Author:  Waz [ Fri Jan 25, 2008 12:25 am ]
Post subject: 

Nice big update you got there!!! Very nice shiney new stuff :P.


And thats the first time ive even actually seen one of them shitful adjustable rear swaybars fitted :shock:

Author:  jimmmy [ Mon Jan 28, 2008 7:50 am ]
Post subject: 

hey mate

looking good

don't suppose you have any pics of the fuel line undr the car?

Did you bend it up yourself?

what sort of alloy/aluminium did you use?

cheers

James

Author:  LAG_510 [ Tue Jan 29, 2008 11:17 pm ]
Post subject: 

hi jimmy, i have yet to complete that part but have done it previously with a smaller diameter line. it'll just be bent using my thumbs :) i am leaning towards running the lines inside the car, but making the joins to the braided lines outside the car for legal reasons. i bought it in a 25 ft roll for about $50 from my local V8 parts store.

Author:  LAG_510 [ Wed Feb 20, 2008 12:12 am ]
Post subject: 

i've been slowly plugging away but have to really pull my finger out as the next wrx/sau track day is at phillip island on the 29th of march and i will be there!

going to the dyno next tuesday, hoping for something around the 200rwkw mark. making new coilovers with r33 brakes for the front and 16 x 8 gtr rims with nice new toyo proxes r888 225 50 16 track tyres. rear will be the same but still four stud for now. i have just over a month to do a lot of things but i reckon its achievable.

as it sits now...

[ img ]

[ img ]

Page 5 of 34 All times are UTC+11:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/