OZDAT
http://www.ozdat.com.au/forum/

Tims Datsun 510 build
http://www.ozdat.com.au/forum/viewtopic.php?t=32640		 Page 1 of 8
Author:  datsonial [ Sat Apr 26, 2014 1:13 pm ]
Post subject:  Tims Datsun 510 build
Hello all,

Well here is my Datsun 1600 I bought a few weeks back, I believe it's a 68 model, or possibly a early 69?

[ img ]
[ img ]
[ img ]
[ img ]

This is now the third one I've owned, however it will be the first one I've built myself (with help from friends and ozdaters)
So now I have my own place, thought it was a grand idea to sell my CA powered 510 and make full use of my garage.
I was looking at buying somthing else for a change, but theres just somthing about the 1600 :)

Pretty much standard, have most the parts in boxes, all in all I think its in good condition, minimal rust and all original paint except the boot.
Rust in rear quarters, tiny bit where rear window sits, boot channel, and sill. I'm probably nieve but it appears pretty decent to the naked eye, floors and engine bay apear tip top.

[ img ]
[ img ]

Plan is at the moment to keep it L series however equiped for a possible SR down the track.
So main priority now is tidying up the body.

Not trying to build a show car or anything, I still want it to be rough around the edges so I can treat it like a filthy pig of a datsun.

Ive propably bit off more than I can chew in terms of a project and my capabilities, but I dont care if it takes me years.

Cheers,
Tim
Author:  nick [ Sat Apr 26, 2014 8:50 pm ]
Post subject:  Re: Tims Datsun 510 build
Definately a 68.
Looks like a good solid shell overall and lucky you got it before too many mods were done to it.
Rust is minimal considering age but the early jap built cars seem to have better rust protection than the later aussie assembled ones.
Great find!
Author:  datsonial [ Fri Oct 24, 2014 8:53 pm ]
Post subject:  Re: Tims Datsun 510 build
First update!

Hi guys, thought its about time I gave this an update.

Soo the build has changed directions to my first post, seems to be a common thing.
I was originally going to tidy it up a lil bit, but figured a may aswell do the long haul.. and also going SR

Started stripping the rest of the gear, dash, bay, fuel tank ect

[ img ]

[ img ]

Bought a bonnet and guard as I was missing those panels, also another front apron.

[ img ]

[ img ]

[ img ]


More pics/updates to come :)
Author:  datsonial [ Sat Oct 25, 2014 8:41 am ]
Post subject:  Re: Tims Datsun 510 build
[ img ]


So with the shell stripped i took it to get blasted & etch primed.

[ img ]

Very happy with how it came up, no major suprises.

[ img ]

Also first time ive had a bonnet on it, minor milestone. Looking like a car!

Even dummy fitted the grille

[ img ]
Author:  Anth510 [ Sat Oct 25, 2014 8:23 pm ]
Post subject:  Re: Tims Datsun 510 build
Nice fresh start, will be following with great interest!
Author:  DATO4 [ Sat Oct 25, 2014 11:32 pm ]
Post subject:  Re: Tims Datsun 510 build
Bringing back a lot of memories looking at a 1600 just in primer. You've got a while to go yet! all part of the fun though. What are those wheels off? Don't think i've seen those before.

If you're after 68/69 headlight and wiper switches, let me know as i've got a both in good condition. I've got a '71 have no need for them.
Author:  trb012 [ Mon Oct 27, 2014 9:15 am ]
Post subject:  Re: Tims Datsun 510 build
Some good progress there mate :thumbsup:
Author:  datsonial [ Wed Oct 29, 2014 9:37 pm ]
Post subject:  Re: Tims Datsun 510 build
thanks lads,

The wheels are Nissan branded, no idea what from, they have custom made circular plates drilled on where the nuts are lol
I'll Pm you about the switches :)
Author:  datsonial [ Wed Nov 26, 2014 8:59 pm ]
Post subject:  Re: Tims Datsun 510 build
Hi peeps,

Plenty of datto action going on... I'll try and cram it into one post.

Bought a mig welder and datsport kit.

[ img ]

Out with the old gear.

[ img ]

[ img ]

Fresh interstate cargo waiting patiently in the corner

[ img ]

127xxx alleged k's on stock boost woo hoo. probz actualy 250ks, limiter bashed by some leb on 30 psi with vct rattle
[ img ]
[ img ]

I then began to strip back bits, loom, fan power steering ect

Looking down the prep'd crushtube hole

[ img ]

Then bought a crane and engine mounts, two boring items but I found out I needed them to actually get the motor in haha
[ img ] [ img ]




NEK MINIT

[ img ][ img ]

[ img ]
[ img ]
[ img ]
Author:  Azzdat16 [ Wed Nov 26, 2014 11:14 pm ]
Post subject:  Re: Tims Datsun 510 build
Sick bro! Fresh canvas to play with!!!!
Author:  unfamilia [ Thu Nov 27, 2014 8:18 am ]
Post subject:  Re: Tims Datsun 510 build
Oh I was hoping for a nice l in there. Nice progress through.
Author:  datsonial [ Sat Nov 29, 2014 10:10 am ]
Post subject:  Re: Tims Datsun 510 build
Thanks guys,

[ img ]

This photo shows my little welding knowledge.
I'm all setup now with gas, equipment ect, have been just experimenting with different setting on scrap metal, and watching lots of youtube tutorials!
If you want somthing bad enough you just have to jump in and learn it.

I've started on the repairs and should have alot more done over the weekend.

My priorities at the moment is
- Repairing all rust with new metal
- Fitting the gearbox ( need to buy bolts aswell )
- Getting a cooler and rad setup, then tidying up engine bay

:)
Author:  SR20Datsun [ Sat Nov 29, 2014 5:22 pm ]
Post subject:  Re: Tims Datsun 510 build
Subscribed.. Good to see another build on the go.
Author:  datsonial [ Mon Feb 02, 2015 4:41 pm ]
Post subject:  Re: Tims Datsun 510 build
Hello all,

Have been working on the rust repairs, coming along slowly but surely.

I'm taking a bazzillion pics of the whole build, everyone loves pics :) just half will be good camera and half on my phone.

Anyways, started the area around rear windscreen. I'm workning on the 'easier' repairs first.


First pic before blasting,

[ img ]

[ img ]
[ img ]
[ img ]
[ img ]
[ img ]
[ img ]
[ img ]


Had a few issues around where the factory lead wiping is, also a few touch up welds places i missed.
The finned section at the bend didnt run to smoothly but turned out OK, i did a few too many cuts then was nesasary and the gaps were too big

[ img ]
[ img ]

[ img ]
[ img ]
[ img ]



I've just drowned it in primer for now
[ img ]

Still needs fine touches, sanding, filling ect before paint
But I can tick it off the list for now.
It's far from a pro job but its also far better then a gaping rusty hole :)
Author:  Jimmy351 [ Mon Feb 02, 2015 7:09 pm ]
Post subject:  Re: Tims Datsun 510 build
looks pretty good for someone just beginning panel repairs! well done mate, a lot braver than me, i'll be watching this thread for sure!
Page 1 of 8 All times are UTC+11:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/