Hi there Ozdat users; I am Josh and this is the Killa6 project that myself and my friend Jason are currently working on (we both use this username). We started off with both a 180B and a 200B (which has been in Jason's family since it was brand new).
The original plan for project Killa6! was to take the engine out from the 200B (more on that engine later) and to put it into the 180B...however after inspecting the 180B for a good while; we had found that rust had taken its toll on the poor little thing
So Project Killa6! will now be remaining as a 200B.
------------------
The 200B features:
------------------
L20B
Custom Cam (unknown specs)
Flat-Top Pistons (5thou oversized)
40mm down-draught Webber Carb
Extractors
Custom Hand-Made SS exhaust
------------------
The plan (for now)
------------------
Regrind Cam
17" alloys
R31 front brake setup
Either keeping the single 40mm carb or ugrading to 45mm...or possibly changing to a Dual-Carb setup
Electroniz dizzy upgrade
New Heavy-Duty clutch
And just a general tidy up of the car
----------
The future
----------
A Respray (once we can afford it)
--------------------------------
And now for the pics
The 180B that project Killa6! was originally going to be based on...
...until we found this...
...and this
...so the decision was made to go with the 200B instead...
Looking really sad
After we pulled it out of the grass
And last but not least; Mechanic Kitteh! Our project manager.
Let us know what you think of our plans
We need help choosing what wheels to get....and what colour to respray the car.
Also; because were both 18 year olds; we are building this car on a budget, so if you have any spare parts we may be interested in feel free to let us know