Ozdat Home Feature Cars Ozdat Classifieds Event Calander Links Trade Link Tech Resource Merchandise Donate Web Mail
It is currently Fri Mar 29, 2024 5:14 am

All times are UTC+11:00




Post new topic  Reply to topic  [ 120 posts ]  Go to page « 14 5 6 7 8 »
Author Message
 Post subject: Re: Re:
PostPosted: Wed Jun 04, 2008 2:54 pm 
Offline
User avatar

Joined: Sun Jun 13, 2004 11:16 am
Posts: 1428
Location: brisvegas
Datsun_16_Hundred wrote:
Another tihng i noticed, when first looking at the dyno sheet was; it says gears: 4 ??
would that have anything to do with the wrong torque reading ?? 4 gears instead or 5 ?
5 gears, you would have a lower final drive ratio ??
or does the gearbox have nothing to do with it ?? ..lol i wouldn't know :oops:
it means the run was done in fourth gear, which is 1:1 on a sr20 gearbox.
as i just finished explaining, the torque reading isnt wrong, its just uncorrected.
the dyno roller size and gear ratio (and wheel size) affect the torque that the dyno reads.
what was wrong was my original understanding of what that torque figure meant.


Top
   
PostPosted: Sun Jun 15, 2008 3:21 am 
Offline
User avatar

Joined: Mon Jul 10, 2006 12:14 am
Posts: 46
Location: Misty Mountains - Nsw
Datsun 180b Sedan:

Ca18det with port&polished head,
Steel head gasket,
EMS Dual Sport computer,
New Garrett GT2860RLS internal gate
Custom top mount exhaust manifold
Nismo lightened flywheel
4 bosch coil packs..
Big adjustable fuel pressure reg
New Bosch 044 fuel pump
intercooler 450x300x75,

210hp/157kw@6500rpm on a safe 12psi
[ img ]

Computer is holding me back a bit... :(

_________________
<- Datsun, the best buy in the long run.. ->

http://www.youtube.com/watch?v=Q7Ii6x-t_jw


Last edited by GO180B on Fri Jul 25, 2008 6:17 pm, edited 1 time in total.

Top
   
PostPosted: Sun Jun 15, 2008 7:59 am 
Offline
User avatar

Joined: Fri May 30, 2008 11:14 am
Posts: 433
Location: Melburn
71 1600

SR20DET standard internals

182 rwkw @ 15psi


Top
   
PostPosted: Fri Jul 25, 2008 5:29 pm 
Offline
User avatar

Joined: Fri Aug 03, 2007 12:12 pm
Posts: 680
Location: Newcastle/Port Stephens, NSW
Hey MFP,

Just wondering if the L20B bottom end is standard ?
Head work ?
Camshaft ?

Etc.. cos im building an L20B with 40mm solexs bored out to 2.022L with 11:1 comp and 72 deg cam just trying to work out if 100hp is plausable :)

Cheers,
Stephen.
MFP wrote:
1600, L20B, 40mm Dellortos, 98 BP, Yokohama 195/50/15, BOC 3.9 diff, Street Torque Dyno Dynamics
My results from dyno night in Alice Springs 24.5.08. Datto 102.5 hp, GT-R 382 hp

http://youtube.com/watch?v=Dt-dzyusz6M

http://youtube.com/watch?v=OLUvFFIFqDg

_________________
Stephen,
Tanilba Bay Tyres & Mechanical - 4982 3599
Formally "Datsun_16_Hundred".
[ img ]
Thy Beast 1600
Datfusion


Top
   
PostPosted: Sat Jul 26, 2008 10:14 am 
Offline
User avatar

Joined: Mon Mar 31, 2008 5:41 pm
Posts: 309
Location: Melbourne
69 1600

13b turbo

194 rwkw @ 12psi

_________________
Datsun 1600 13bt

KANARIS ENGINES 03 94623387
http://www.kanarisengines.com/


Top
   
PostPosted: Fri Jan 29, 2010 10:50 am 
Offline
User avatar

Joined: Mon Sep 29, 2003 5:21 pm
Posts: 706
Location: Perth
Time for an update..........

Current set-up is:

SR20DET running 19psi boost
Strandard Crank
Standard Rods
Forged 10.5:1 CP pistons
Tomei Poncams
Adjustable cam gears
Cometic Head Gasket
Standard inlet Manifold
Standard Throttle Body
Custom Exhaust Manifold
Garret GT2876r (modified for external gate)
Tial 38mm External gate with screamer pipe
PWR Intercooler
740cc Nismo injectors
E85 Fuel from Power Plus
Motec ECU

Normally runs a 36mm restrictor which previously made 309hp. Quick tune yesterday with no restrictor for fun resulted in 400hp at the wheels.

[ img ]

_________________
www.full-throttle.com.au
www.boostcooler.com.au

When the Flag drops........... the Bullshit stops
Go hard or go home!


Top
   
PostPosted: Fri Jan 29, 2010 12:21 pm 
Offline
User avatar

Joined: Fri May 02, 2008 3:12 pm
Posts: 1093
Location: SUNSHINE COAST QLD
510 sedan
L18 - just started to blow smoke
small port a87 head
unknown lumpy cam
twin 40mm dellortos
s2 bb dizzy
extractors
2" exhaust
bb 5spd
3.7 r160
14"185 x 70 wheels

made 59 rwkw or 75 rwhp at barnes high performace,couldnt rev past 5000 rpm (dizzy malfunctioning) found out later that the alternator wire came off and was killing the battery :(

_________________
68 510 - soon to be restored into a replica 68sss
69 510 - current build - L20b turbo
91 GT turbo legacy
GET THAT DATSUN DIFFERENCE!


Top
   
PostPosted: Fri Jan 29, 2010 1:44 pm 
Offline
User avatar

Joined: Fri Dec 05, 2008 12:07 am
Posts: 622
MFP posted this back in 2008 so it might be a bit late to ask now
Quote:
1600, L20B, 40mm Dellortos, 98 BP
Quote:
Datto 102.5 hp
What other mods did this have? Raised comp? Fat cam?
EDIT: noticed someone noticed the same thing further up!

_________________
[ img ]


Top
   
PostPosted: Fri Jan 29, 2010 2:43 pm 
Offline
User avatar

Joined: Fri Sep 24, 2004 1:54 pm
Posts: 1718
Location: Melbourne, VIC
FJ20ET, 3" exhaust, k&n pod, microtech lt10s, 12psi. 155kw atw

_________________
build-threads.com


Top
   
PostPosted: Fri Jan 29, 2010 3:06 pm 
Offline
Moderator
User avatar

Joined: Sat Oct 30, 2004 2:28 pm
Posts: 5357
Location: Melbourne, Australia
S14 Jap Spec SR20DET (BB T28)
3" Stainless steel exhaust turbo back, CAT & resonator and Magnaflow straight through muffler
'Merge' type stainless dump
S14 factory AFM
Hybrid intercooler (600x300x76)
Greddy Pod Filter
TurboTech Valve (10psi)
Nistune ECU daughter board with conservative tune (safe)
Bosch 044 pump with SWR surge (Piergerg lift)

162rwKw.

(Got the AFM, still saving for Injectors, EBC, and perhaps a GT2871R turbo)

_________________
1972 Datsun 1600, S14 SR20DET Engineered (204rwkW @ 17psi.)
viewtopic.php?t=6579
#SR20Datsun @SR20Datsun


Top
   
PostPosted: Mon Feb 15, 2010 8:04 pm 
Offline
User avatar

Joined: Thu Aug 03, 2006 1:17 am
Posts: 458
s13 sr20det
t28 s14a turbo
GtiR quad throttle bodies
bosch z32 afm
siemens 570cc injectors
bosch 044
3 inch exhaust
factory airbox
avcr electronic boost controller
pwr cooler
nistune equipped ecu

202rwkw @ 18psi


Attachments:
[ attachment ]
dyno graph 18psi.jpg [ 36.41 KiB | Viewed 13770 times ]
Top
   
PostPosted: Mon Feb 15, 2010 8:57 pm 
Offline
Old Digger
User avatar

Joined: Fri Dec 17, 2004 2:51 pm
Posts: 3521
Location: Frankston Vic
1969 Datsun 1600
CA18DET
85.5mm CP Forged Pistons
NDC race bearings
Shot Peend Rods
ARP rod bolts
New stock mains bolts
ACL MLS head gasket
Ports cleaned up
Stock cams
Inlet butterflies removed
Stock FPR
460cc GTIR injectors
Z32 MAF
Apexi Super AVC-R
Stock exhaust manifold
Exhaust mandrel stainless system 2.5' to cat 3' from cat to xforce muffler 4.5 tip
Garrett GT2560R
Nistune with LM2 wideband

185rwkw @ 16 PSI with no air correction

Coming soon GT2871 with 700cc injectors and poncams with adjustable cam gears. Hoping for approx 250rwkw :twisted:


Attachments:
[ attachment ]
mydato dyno 185 web kw.jpg [ 79.86 KiB | Viewed 13769 times ]

_________________
1928 Model A CC Pickup
Top
   
PostPosted: Tue Feb 16, 2010 8:36 am 
Offline
Moderator
User avatar

Joined: Sat Oct 30, 2004 2:28 pm
Posts: 5357
Location: Melbourne, Australia
Brad, you bought your turbo yet?
Wanna buy two at the same time (discount???)
Get me a price, and i might consider...

_________________
1972 Datsun 1600, S14 SR20DET Engineered (204rwkW @ 17psi.)
viewtopic.php?t=6579
#SR20Datsun @SR20Datsun


Top
   
PostPosted: Tue Feb 16, 2010 9:16 am 
Offline
Old Digger
User avatar

Joined: Fri Dec 17, 2004 2:51 pm
Posts: 3521
Location: Frankston Vic
Not yet Nik. Waiting for the dollar to do good things then will buy from a US dealer. I'll find out costing for 2 items. Cheers

_________________
1928 Model A CC Pickup


Top
   
PostPosted: Tue Feb 16, 2010 9:33 am 
Offline
Moderator
User avatar

Joined: Sat Oct 30, 2004 2:28 pm
Posts: 5357
Location: Melbourne, Australia
Thanks mate.

_________________
1972 Datsun 1600, S14 SR20DET Engineered (204rwkW @ 17psi.)
viewtopic.php?t=6579
#SR20Datsun @SR20Datsun


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 120 posts ]  Go to page « 14 5 6 7 8 »

All times are UTC+11:00


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: 

Powered by phpBB® Forum Software © phpBB Limited