Good Day, new to this and after a little advice I have a 1200 ute which I purchases a full bluebird strut conversion for everything bolted up perfect except the tapered hole on the pitman arm is much smaller than the Bluebird one is there a different pitman arm I should run any help would be greatly appreciated Thanks Daniel

Angus tells me that it is possible to put 180B or 200B struts onto a Datsun 1200. The main problem is that the spacing of the steering arm bolts is different on the larger struts. This can be overcome by using either Sunny or Stanza steering arms, which are the same shape as those in a 1200 or 120Y, except for the bolt spacing.

This in turn may require the ball joints to be swapped, as the ball joints (in the 120Y - after July '76?) changed to a larger size in later vehicles.

The master cylinder will probably need to be changed as well. A 1600/180B/200B etc master cylinder will probably fit the bill.
=====================================
Breast Enhancement Cream | Breast Enhancement Pills