Just an FYI
if the rear seat in your 610 is rooted, I've just fitted the base of an s13 rear seat in my SSS
the back is do-able, but you have to mount a hinge and clips.

I just fitted the base, nice and contoured and weighs like 1/2 the factory seat.

will eventually get it retrimmed in black vinyl to match the rest of the interior.

best thing, it cost me $1.25 on ebay

hope this helps someone!

_________________

automotive clothing at www.burubado.com

get some pics up mate

_________________
build-threads.com

Yeh pics

_________________

Does anyone know if the rear seat of a 910 is much wider than the 610 ?
I might have a set of front and rear seats from a R34 on hands, would be cool to have them in my 910

Ok, I apologise in advance for the sh*t images.
original seat, water damaged from a missing window seal (now replaced) and painted black to try and disguise it.


s13 seat:


the back, it's a bit too skinny down the bottom so would be a bit gappy, plus, it doesn't use the hook and screw system the 610 uses, it uses a hinge and clip system, so harder to install. So i didn't bother - mine is covered anyway.


I'll get them both trimmed in black vinyl at some stage so they match the front seats I'm going to get.

_________________

automotive clothing at www.burubado.com

im doing the same set up in my 510 to give it the bucket look to match the front
but im hoping to use the backrest aswel

If you want to use the back rest get the hinges and clips.

alternatively, you may be able to set up the seat so it works like the factory hook system......

I am still contemplating using the backrest, but time is lacking at the moment.

_________________

automotive clothing at www.burubado.com

looks like a nice fit. Where are you going to source the front buckets from, yahoo?

_________________
build-threads.com

That's how I've sourced most of my other parts, so most likely, yes.
I do know a few people who go to Japan quite regularly though, so I may find another way.

_________________

automotive clothing at www.burubado.com

Talk to Dan aka Green510 he helped me bring in the Work Equip 03s i had bought for my 180B.

_________________
"You stay classy OzDat"

I get Jesse Streeter to send most of my stuff.
The service he provides is brilliant.

_________________

automotive clothing at www.burubado.com

i've been looking at S14 seats, they measure up good for the 510, but haven't sourced any for a trial fit before handing over $$.
maybe $1.25 specials on ebay are the go

i wasn't going to spend much more than that on a back seat i'd have a hard time reselling..... lol
the guy was only 15 mins drive away too

_________________

automotive clothing at www.burubado.com