so please bare with me, trying to get my 240k ready for Sunday so im running out of time here.

been going thru and fixing a few problems with my brakes, flushed the lines, Brand New brake master, gravity bleed the fronts and they are mint... rears nothing. bleed the Brake master, its sweet, removed the downstream line for the rear brakes on the Proportioning valve and nothing.

Pulled it apart and its very corroded in there and looking past its time.

so i haven’t run around yet as i only found out tonight, im sure if i ring brake places it will be "maybe we can rebuild it but we will have to look" or none in stock and we will have to order it in. both would be a PITA.

so what's similar that i could go and grab from a wreckers, or does anyone have a spare one locally? (re: Brisbane area?)

thanks.
john.

john if the 180b one fits, you can borrow the one off my car?
it's going to be out of action for at least a few weeks

best pic i can find.
http://members.iinet.net.au/~joel_amy/J ... ge0088.jpg

_________________

automotive clothing at www.burubado.com

got a c210 one today, the rear bled fine. the front passenger has locked on tho and the front drive's side seams to be fine.

tested a different caliper to make sure it the passenger front wasnt seazed and it still did it.

i was under the impression that the front brake lines ran thru the proportion valve just as a tee piece. but do these also proportion between left and right brakes?

also, would ther differance between C110 twin pots and C210 single pots cause it to do this?