I'm having to get a new boss cause my new steering wheel has smaller bolts (4mm) than I currently have (6mm).

So I'm wondering whether someone on here could tell me if my steering column is from a Stanza.

Thanks!

A pic of the column would be nice as the switch gear can be fitted to various columns.

_________________
A little knowledge is a dangerous thing.
www.datsport.com

"R.I.P. Baz. 29 April 2022. Thank you for all your contributions to the Datsun community over the years. You will be missed." - OZDAT

righto

under dash pic where it mounts to dash frame.
where it mounts to firewall inside.
where it connects to steering box.
that should do the trick.

_________________
A little knowledge is a dangerous thing.
www.datsport.com

"R.I.P. Baz. 29 April 2022. Thank you for all your contributions to the Datsun community over the years. You will be missed." - OZDAT

Thanks Baz, hope this helps.

.

That is a standard late model 1600 column.

_________________
A little knowledge is a dangerous thing.
www.datsport.com

"R.I.P. Baz. 29 April 2022. Thank you for all your contributions to the Datsun community over the years. You will be missed." - OZDAT

Thanks Baz, great to know!

So my next question is where can I get a boss for it with the smaller 4mm holes?

All good; went down to East Coast Auto Spares and got a boss.

Done!

.

how much for that wheel and that centre and where can I get it?

_________________
Simon,

1978 Stanza, undergoing track spec build.

Actually I just posted all the info in the 'what steering wheel?" thread

http://www.ozdat.com/forum/viewtopic.ph ... 4&start=30

That is definitely a stanza column, but anlot have the same spline so many boss kits will fit. For example my stanza boss kit fit my mates dr30 skyline spline.

_________________