Offline |
|
Joined: Wed Nov 28, 2012 1:59 pm Posts: 122
Location: Vancouver Island B. C.
|
The weak link in the FS5W63A dogleg is the small counter shaft bearing at the front. Replacing it will likely get rid of the noise.
No way to make a long into a short without swapping in the shorter mainshaft and the shorter tailstock to cover it. I don't know what the 1-3 ratios are on the long but they would probably fit the shorter mainshaft. This is a lot of work and swapping in used bearings is not worth the trouble. Less trouble to shorten your driveshaft and run a longer transmission.
|
|