I am hoping that someone might know the factory offset for a 200B wheel? I think they came with an alloy option from factory on the SX? if so that offset would be preferred.




oh yea I been searching for ages too but all I found was that they may be made by ROH and called fireballs 14x6?

+20 rings a bell, but I'll measure one for you tomorrow. I've heard ROH or Cheviot from different people, I'll see if one of my SX wheels will tell me.

_________________
green200b - aka Alistair

The fleet:

Australia:
'80 200B GX - the green200b - hibernating
'81 RX-7 - 12A extend port - daily
'74 RX-2 - 13B bridgeport - cruiser

Europe:
'93 200SX - CA18DET - tourer

thanks, that would be awesome!

I found some info to say that the wheel track is 10mm wider on the SX with the factory alloys so probably only 5mm offset difference from whatever the factory offset is.

i think the steel stokies offset is +30

My measurements of the steelies came up at around +30

this reference says SX was 10mm wider track http://www.uniquecarsandparts.com.au/da ... ations.htm

so you might assume the SX wheels are 14x6 +25

Will be interesting for someone to actually measure and confirm though.

_________________
you are not a beautifull and unique snowflake...

These? S110 (second gen 200sx)

Mike the 200b SX trim was an Aussie market car only. Basically it had a sportier interior trim and bumpers/spoiler and alloy wheels.

_________________
you are not a beautifull and unique snowflake...

hey thanks guys. yea those wheels arn't the ones we got here afaik datzenmike.

AYJAY I think you have confirmed all I have found out without having the wheels here to measure. +25mm offset is what I thought too, cheers!