Sounds great, a picture of the pillar from the outside with the door open would be helpful , as i live in country Vic there is none around to have a look at I have only ever see one in real life at a hillclimb meeting and was to busy to get a good look.
The measurement sounds familiar as I read a post a couple of years ago that had the measurements in it , But can't remember where the post was never mind the measurements. So if could check, 4 door fd 930mm + 156mm = 1086 mm i hope its write because that puts it about 100mm in front of the rollover bar/cage and give plenty room to work.
Along the body "crease" line below the door lock. yep thats the line I meant .
I dont expect to do a perfect replica, but it will be nice to have something to aim for . Thank You. Neil.
_________________ Life is incomplete without a datto !
|