OZDAT http://www.ozdat.com.au/forum/ |
|
2 x 1600 builds one thread :) http://www.ozdat.com.au/forum/viewtopic.php?t=25857 |
Page 2 of 3 |
Author: | hailest [ Tue Jun 05, 2012 8:28 pm ] |
Post subject: | Re: 2 x 1600 builds one thread :) |
I like it Joel, so whats the secret, how did you get it to fit? |
Author: | joebry [ Tue Jun 05, 2012 10:08 pm ] |
Post subject: | Re: 2 x 1600 builds one thread :) |
It has the same gap as you showed me Trent and will need some work to fit properly, im thinking maybe pull the lower centre of the valance out a small amount to compensate , only other way is to cut from the outside in to close up the middle and reprofile the whole mounting edge to suit better. |
Author: | macdatty [ Tue Jun 05, 2012 10:34 pm ] |
Post subject: | Re: 2 x 1600 builds one thread :) |
Man, your car looks about as good as a 1600 can look in the photos above with the white walls on it. Have you dummied up the spoiler look yet? I really can't see it looking better than it already does. Sorry, you probably don't want to hear that since you've just got your spoiler, but it just looks so good in those photos |
Author: | joebry [ Tue Jun 05, 2012 10:49 pm ] |
Post subject: | Re: 2 x 1600 builds one thread :) |
not really after the rock stock look but I still got all its bits it came with , just after a more spirited drive hence the current setup the spoiler was a impulse buy and its dummied in previous page and if I do fit itll get bolted to another valance and then enable me to swap it over forgot to say those whitewall pics are prob 4-8 year old now |
Author: | hailest [ Thu Jun 21, 2012 7:32 pm ] |
Post subject: | Re: 2 x 1600 builds one thread :) |
Hey Joel, Looks fantastic! Keep the updates coming Cheers, Trent |
Author: | DRiPproject [ Sat Jul 07, 2012 10:58 pm ] |
Post subject: | Re: 2 x 1600 builds one thread :) |
Awesome work my friend, Sunbury will end up with a few rather nice datos by the look of it. |
Author: | joebry [ Sun Jul 08, 2012 4:00 pm ] |
Post subject: | Re: 2 x 1600 builds one thread :) |
finally had some success , i spent some time going over it all this morn and found a couple connectors causing issues, got them sorted and working correctly then banged on the starter again. Eventually it fired to life got it to run enough to get some heat buildup etc and have parked it at that till i fit up a wideband to see whats happening and then try get someone knowledgable to help. |
Author: | old-tin [ Sun Jul 08, 2012 4:44 pm ] |
Post subject: | Re: 2 x 1600 builds one thread :) |
looks sweet what ecu are you using? you will defiantly need a sideband o2 sensor and if you haven't already you should get some resisted spark plugs |
Author: | joebry [ Sun Jul 08, 2012 5:47 pm ] |
Post subject: | Re: 2 x 1600 builds one thread :) |
thanks oldtin , its a LT10s fuel only atm and got a innovate lc1/gauge coming this week , plugs I think there r types but need some new one for it and in searching for an l16 , Ngk BPR6EIX come up so ill grab a set and see if that helps |
Author: | joebry [ Wed Jul 11, 2012 8:30 pm ] |
Post subject: | Re: 2 x 1600 builds one thread :) |
http://youtu.be/ltXjiUFKb_o small video off it running |
Author: | old-tin [ Wed Jul 11, 2012 8:44 pm ] |
Post subject: | Re: 2 x 1600 builds one thread :) |
sweet still has the twin weber sound |
Author: | hailest [ Wed Jul 11, 2012 9:01 pm ] |
Post subject: | Re: 2 x 1600 builds one thread :) |
Nice one Joel, sounds great!! |
Author: | CASUNNY [ Wed Jul 11, 2012 9:59 pm ] |
Post subject: | Re: 2 x 1600 builds one thread :) |
Hey mate sorry to take the focus off your motor, but i was just looking at your steering column is that out of an 70/72 1600 ? I have a 68 and i'm having trouble fitting a collapsible column theres just to big of a gap. TUFF set-up you have there by the way =) |
Page 2 of 3 | All times are UTC+11:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |