OZDAT
http://www.ozdat.com.au/forum/

LAG 510's 1600 sr20det forged twin scroll twin gate goodness
http://www.ozdat.com.au/forum/viewtopic.php?t=10308		 Page 33 of 34
Author:  SR20Datsun [ Wed Oct 11, 2017 4:23 am ]
Post subject:  Re: LAG 510's 1600 sr20det forged twin scroll twin gate good
Good to hear you are still on here Leigh. Keen to see some updates!
Author:  LAG_510 [ Wed Oct 11, 2017 7:15 pm ]
Post subject:  Re: LAG 510's 1600 sr20det forged twin scroll twin gate good
Yeah still here! I'll post an anth-esque photo detailed thing as I go

So this is the go, R32 gtr lsd centre into a long one r200. It's a 3.9 ratio, I'd love a 4.1 but couldn't find one at the time

[ img ]

The centres measure the same, the crownwheels are very different in thickness. Funnily enough the old dr30 one is thicker

[ img ]

[ img ]

[ img ]

Here's the bolt differences. The m13 looks huge compared to the m10.

[ img ]

[ img ]

First step is to get some bits made up with m13 od m10 I'd to bolt it together
Author:  green200b [ Wed Oct 11, 2017 7:22 pm ]
Post subject:  Re: LAG 510's 1600 sr20det forged twin scroll twin gate good
Good to hear you're still alive Leigh :thumbsup: keen to see some progress on this. Is the new diff an R230? Should be interesting making it all fit.
Author:  LAG_510 [ Wed Oct 18, 2017 8:59 pm ]
Post subject:  Re: LAG 510's 1600 sr20det forged twin scroll twin gate good
It's not gonna be quick but I'll try to keep some updates and info flowing...

Spacers machined up, cost me 30 bux

[ img ]

[ img ]

So the reason any high powered datsun ends up needing a new rear end? They blow a 'fuse'

[ img ]

I'll start with the diff end first. R180s share the same input spline to the diff so still have the shafts as a weak point

Here's why the gtr centre should be a very hard to break option

R160/80 vs gtr R32 r200

[ img ]

Interesting to note the spline count and the difference between the gtr r200 centre and other r200 centres like the S13 or z31tt r200

[ img ]

[ img ]
Author:  SR20Datsun [ Thu Oct 19, 2017 1:54 pm ]
Post subject:  Re: LAG 510's 1600 sr20det forged twin scroll twin gate good
I like where this is headed Leigh..
Author:  unfamilia [ Fri Oct 20, 2017 7:36 am ]
Post subject:  Re: LAG 510's 1600 sr20det forged twin scroll twin gate good
Same. Nice simple spacers fix a problem. I like it
Author:  DATREBB [ Fri Oct 20, 2017 9:28 am ]
Post subject:  Re: LAG 510's 1600 sr20det forged twin scroll twin gate good
It's great to see people working on their own Datsuns and coming up with something new to fit these awesome cars.
Author:  LAG_510 [ Mon Oct 23, 2017 10:04 am ]
Post subject:  Re: LAG 510's 1600 sr20det forged twin scroll twin gate good
im definitely not the first to do this, but ive had these bits stored for probably close to ten years! and hopefully if i use lots of oem bits then if i break anything i can find a replacement easily enough. a lot better than paying through the teeth for an old clutch pack long nose that id have to probably recondition anyway. and no adapters to run cvs, just big beefy oem bits. thanks mr nissan!
Author:  d [ Thu Oct 26, 2017 1:40 pm ]
Post subject:  Re: LAG 510's 1600 sr20det forged twin scroll twin gate good
Leigh what is the diff rings difference in weights? one looks much thinner than the other
and see why the ae86 japs run alloy plates with thicker rings machined down to save weight
Author:  LAG_510 [ Mon Nov 27, 2017 7:50 pm ]
Post subject:  Re: LAG 510's 1600 sr20det forged twin scroll twin gate good
D, not sure I tried to weigh them on my bathroom scales but had no luck. There couldn't be too much in it but reduced weight would be a good thing!

Not much actual progress but I had a dummy fit of the centre and so far so good... I've got a few options on rear cover too. S13, dr30 or gtr. I'm pretty confident this part of the drivetrain will be in tact for many years to come

[ img ]

[ img ]

[ img ]

[ img ]

[ img ]
Author:  unfamilia [ Mon Nov 27, 2017 11:58 pm ]
Post subject:  Re: LAG 510's 1600 sr20det forged twin scroll twin gate good
Nice one. Any incremental weight gain can always be offset by getting more boost to the ground now
Author:  Coz22a [ Tue Nov 28, 2017 1:55 am ]
Post subject:  Re: LAG 510's 1600 sr20det forged twin scroll twin gate good
Nice work
Author:  SR20Datsun [ Tue Nov 28, 2017 9:05 am ]
Post subject:  Re: LAG 510's 1600 sr20det forged twin scroll twin gate good
Very cool. I agree, I don't think you will need to worry about this diff for a while...
Author:  Coz22a [ Tue Nov 28, 2017 9:13 am ]
Post subject:  Re: LAG 510's 1600 sr20det forged twin scroll twin gate good
Nice work.
It looks like your using the thicker ring gear from the DR30?
Will you have to machine it down to same thickness as the GTR one to Mate with the pinion?
Also what are your plans for cv shafts and flange type out at the wheel hub?

Thanks
Mick
Author:  LAG_510 [ Thu Nov 30, 2017 10:20 am ]
Post subject:  Re: LAG 510's 1600 sr20det forged twin scroll twin gate good
Cheers :thumbsup:
Yeah the thicker ring gear is the one im using because it matches the pinion as its from the same diff. The thinner one from the GTR is from a short nosed diff and would suit that, but the centres are the same. so its essentially just a centre swap.
I'll post some pics of the shafts, but i have some z31t hubs (thicker and higher spline count) and matching flanges as well as the shafts. itll be a hybrid z31t/r32gtr shaft and cv combo
Im running r30 arms so the hubs all just fit without mods
Page 33 of 34 All times are UTC+11:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/