Came to Pizza in June IIRC. Not much has changed.
Was good to see home again, that was the first time in almost 4 years.Will be back next October.
Dave
| OZDAT http://www.ozdat.com.au/forum/ |
|
| 1978 280Z http://www.ozdat.com.au/forum/viewtopic.php?t=12030 |
Page 3 of 3 |
| Author: | thehelix112 [ Wed Nov 11, 2009 10:00 am ] |
| Post subject: | Re: 1978 280Z |
Came to Pizza in June IIRC. Not much has changed. Was good to see home again, that was the first time in almost 4 years.Will be back next October. Dave |
|
| Author: | thehelix112 [ Thu Nov 12, 2009 9:44 am ] |
| Post subject: | Re: 1978 280Z |
Bored so here are some pics of the suspension mods: Coil overs: ![[ img ]](http://album.hybridz.org/data/929/medium/step4-in-vice.jpg) ![[ img ]](http://album.hybridz.org/data/929/medium/step5-cutting.jpg) ![[ img ]](http://album.hybridz.org/data/929/medium/step9-pipe-cutter.jpg) ![[ img ]](http://album.hybridz.org/data/929/medium/step12-cut-off.jpg) ![[ img ]](http://album.hybridz.org/data/929/medium/step13-grind-down.jpg) ![[ img ]](http://album.hybridz.org/data/929/medium/step13-shorten-carrier.jpg) ![[ img ]](http://album.hybridz.org/data/929/medium/step14-file-out-carrier.jpg) ![[ img ]](http://album.hybridz.org/data/929/medium/step17-strut-top-drill.jpg) ![[ img ]](http://album.hybridz.org/data/929/medium/step18-strut-top-tap.jpg) ![[ img ]](http://album.hybridz.org/data/929/medium/struts-grinding.jpg) ![[ img ]](http://album.hybridz.org/data/929/medium/struts-painted.jpg) ![[ img ]](http://album.hybridz.org/data/929/medium/step30-installation-order.jpg) ![[ img ]](http://album.hybridz.org/data/929/medium/step32-reinstall.jpg) Sway bars: ![[ img ]](http://album.hybridz.org/data/930/medium/step2-mark_and_cut.jpg) ![[ img ]](http://album.hybridz.org/data/930/medium/step4-weld_flat.jpg) ![[ img ]](http://album.hybridz.org/data/930/medium/step5-weld_flat_to_arm.jpg) ![[ img ]](http://album.hybridz.org/data/930/medium/step9-drill_holes_in_lca.jpg) ![[ img ]](http://album.hybridz.org/data/930/medium/step12-bolt_in.jpg) Tie rod ends: ![[ img ]](http://album.hybridz.org/data/969/medium/CIMG0074.jpg) ![[ img ]](http://album.hybridz.org/data/969/medium/CIMG0072.jpg) ![[ img ]](http://album.hybridz.org/data/969/medium/finished-tie-rod-ends.jpg) ![[ img ]](http://album.hybridz.org/data/969/medium/CIMG0081.jpg) Finished: ![[ img ]](http://album.hybridz.org/data/929/medium/step32-installed.jpg) Build thread on hybridz is in signature, photos and more are here: http://album.hybridz.org/showgallery.ph ... 52&cat=500 Dave |
|
| Page 3 of 3 | All times are UTC+11:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|