Hi everybody!!!

I decided to create a new topic because of the amont of pictures!!!
So this is the second part and more new things have been done to the car...hope you enjoy it as much as I!!!

Fot the ones who want to see teh first post,the first part is here: http://ozdat.com/forum/viewtopic.php?f= ... 3&start=15

Hi everybody!!!

Thank you for your comments!!!

DattoA10 : Yes, you are right! This 1200 will be as new as the first day he saw the light os the day! I'm really glad to see the evolution...hope in April this project will be finished!
Tomorrow I'll try to put the last photos!!!



We are almost up to date, because the car isn’t ready yet!!! Tomorrow if I’ve time I’ll put the rest of the photos until the moment!!!
Some stuff is from January…but there are so many pictures and I want to put them all for you to see some details and learn more about this mythic car.

Today I’ll start with the antenna! Very cool! It was cleaned and fixed again!



The lights were cleaned too but the headlamp rings were yet cleaned.



Before...


And after...



Look now...we didn’t resist and start to put the lights puzzle on the car...





These parts were able to put...





Then the grille eyebrow surrounds…




The grill wth all the symbols and...


The final result!!! Awsome!!! I wasn’t believing that the car had the front ready...


We mount the washer nozzle!!!



And also the lights parts on the interior of the car...



The motor! Not ready yet!





The symbols on the back!!!




And the frieze...



And a back photo...



The bumpers meanwhile came from the metalurgic...are new…





And the wheels ready to be painted...


The new shifter ...


The brake caps ...




These rubbers ...for the capôt!



The three thigs together!



And the ID from the car!!!


And Mr. Vitorino plate...it certifies the Project!!!



The rubbers...



The floor rubbers...


The side rubbers...





And the new brake tubes ...

On the front...




On the back...


The horn was cleaned and installed...



In the tablier, we change the electric circuit, I bought a new one and I want to review it before intaled....




Then we set the tablier with the rádio, the ashtray, grills and the glove compartment!




I bought these wheels cap, but they are in a very bad mood...I need to buy some again!...






And the car after some components installed!




Some new-old wheels cap...much better...now I’ll choose which are going to be restored!







The brake pads



The trunk rubber...




These hood bumpers were made by size by my father...



On its place...


And the wheels with the tires...


Mr. Vitorino working...


And for the first time in months the car touch the ground...The first time we are seying it...






And a new wheels to restore...not for this car...but for another that I have!



Cumps.
The hood holdel...


The radiator cap...



The car was all isoladet with gravel...now it’s all protected on the outside…





And the final result!!!












The clutch pump all verified...no need to be substituted...





And ready to fit the car...





The gearbox fixed!!!



The strat motor...



Then the transmission...







The carte protection....



We put also the new rubber and Wheel!





And I bought some more new parts!!!

The interior light!





The battery tray system!







The gearbox rubber...



And the rubbers...









These ones on my car didn’t exist...somebody took them before I bought the car...



And a final photo...



I hope you liked the photos and the advances!!!
Tomorrow I’ll try to put some more photos!!!
And it’s time to see Mr. Vitorino’s garage!!!

Cumps.
Mário