Offline |
Guru |
|
Joined: Fri Mar 07, 2003 4:58 pm Posts: 2637
Location: Adelaide.
|
Depends on what booster you have.
The 180B type is small enough in diameter to slip straight in to the firewall and you mount the M/C to the studs on the front.
Hook up a vacuum hose to the intake manifold and job done.
If it is a 200B type, larger diameter, the spacer block needs to be sectioned and the inner guard dimpled to fit the booster in.
_________________ Regards, Graeme
Just trying to help...
http://nissanman.shutterfly.com/
graemes@internode.on.net
|
|