OZDAT http://www.ozdat.com.au/forum/ |
|
My SR 1600 (finished finally!) http://www.ozdat.com.au/forum/viewtopic.php?t=19425 |
Page 3 of 3 |
Author: | SR20Datsun [ Wed Nov 30, 2016 9:07 am ] | |
Post subject: | Re: My SR 1600 (finished finally!) | |
E85?
Lol. Tyrie's answer to everything!
|
Author: | TD.711 [ Wed Nov 30, 2016 4:48 pm ] | ||
Post subject: | Re: My SR 1600 (finished finally!) | ||
E85?
Lol. Tyrie's answer to everything! Major overhaul has started Will post up some pics when I can and I'm sorry if they are too big. Drove the car up to a mates on Saturday and the car didn't make it home. Was just going to pull the old 200b struts out and replace with the datsport 280mm units. This was done, then we got a little carried away the head was pulled off Mods to come include Install new head Upgrade fuel system to suit e85, 2200cc injectors, bosh 044 pump, new lines etc Rb25 gearbox to go in, tunnel will have to be modified, new tail shaft New ecu to go in ems em70 |
Author: | RJB510 [ Sat Dec 03, 2016 1:22 pm ] |
Post subject: | Re: My SR 1600 (finished finally!) |
Lot of work planned! Make sure you share the progress with everyone! |
Author: | SR20Datsun [ Mon Dec 05, 2016 9:15 am ] |
Post subject: | Re: My SR 1600 (finished finally!) |
What sort of mods to the head are you going to make? |
Author: | TD.711 [ Thu Dec 08, 2016 6:07 pm ] | |
Post subject: | Re: My SR 1600 (finished finally!) | |
What sort of mods to the head are you going to make?
Head has been built and is ready to go on,Head specs are Hks adjustable cam gears Hks 264 cams inlet and exhaust Super tech valves Super tech valve springs and retainers Arp head studs Head has been ported to suit new valves etc. Cometic head gasket to go on I have pics but they are on my phone and are too big to upload, I can send them to some one if they want to help me upload Back to the car Old head has been taken off All new hoses around the block to go back on New water pump, new fan belt, to go on. Started on the fuel system too, pulled all the old pumps out, pulled the tank out, After pulling the tank out I now know why the car is so smelly Breather is farked Dummy fitted new fuel rail, fuel reg, flex fuel sensor. Heaps more to do, but we've made a good start |
Author: | RJB510 [ Sat Dec 17, 2016 10:22 pm ] |
Post subject: | Re: My SR 1600 (finished finally!) |
Pics from Tim, Attachment:
Attachment:
Attachment: Attachment:
Attachment: Attachment:
|
Author: | RJB510 [ Sat Dec 17, 2016 10:28 pm ] |
Post subject: | Re: My SR 1600 (finished finally!) |
Attachment:
Attachment: Attachment: Attachment:
Attachment:
|
Author: | TD.711 [ Sun Dec 18, 2016 12:43 pm ] |
Post subject: | Re: My SR 1600 (finished finally!) |
Thanks for that Ross |
Author: | SR20Datsun [ Mon Dec 19, 2016 8:27 am ] |
Post subject: | Re: My SR 1600 (finished finally!) |
Turbo envy... |
Author: | TD.711 [ Mon Feb 27, 2017 3:52 pm ] |
Post subject: | Re: My SR 1600 (finished finally!) |
Small update Motor is back together, and it starts, it runs very rough though ! The old Haltech E6k doesn't like the big injectors that I've put in, just pumps too much fuel in and fouls the plugs. In about a week, it's off to get the new ecu installed, and then a tune after that. If anyone is after the E6k , it will be for sale, with the loom, (unsure if with or without sensors ) waiting on my mechanic. And coils igniter and leads to suit. Over all pretty happy, should have it going in a month or so hopefully, all things going well. Cheers Tim |
Author: | SR20Datsun [ Tue Feb 28, 2017 10:29 am ] |
Post subject: | Re: My SR 1600 (finished finally!) |
Put that battery in the boot man... More room for activities! |
Author: | TD.711 [ Tue Feb 28, 2017 4:14 pm ] | |
Post subject: | Re: My SR 1600 (finished finally!) | |
Put that battery in the boot man... More room for activities!
I Like the battery in the front, no Voltage drop. Had the same battery for 9 years, only just starting to wear out, so I think it's time for a new one.
|
Author: | RJB510 [ Tue Feb 28, 2017 5:54 pm ] |
Post subject: | Re: My SR 1600 (finished finally!) |
Looking forward to seeing it's potential once tuned! Watch this space! Battery in the bay is good for simplicity. It'll look cleaner in the boot and with the correct cable, it won't affect the voltage much. |
Author: | MY110 [ Wed Mar 01, 2017 7:52 pm ] |
Post subject: | Re: My SR 1600 (finished finally!) |
Looking good Tim |
Page 3 of 3 | All times are UTC+11:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |