if you have fitted differant seats in ur datto post a pic

i had honda prelude in mine, fitted nice and wernt too hard to fit, very suportive

_________________
-1969 1600 SR20

Perfect thread, I was about to make one.

Can we also get info on how it was to install/ heights etc.

I was about to post up a Topic of seat installs and do a write up but this will be great

_________________
]

mine sat a bit higher than the standards but i think the standard seats are to low, im just under 6ft and i had plenty of room, for memory we used square tubeing on a few corners to make it sit level and longer bolts but that was about it

_________________
-1969 1600 SR20

I've fitted Cobra Trophy fixed back seats, used some square hollow sections to fix them onto the original rails, they sit a bout 1" or 2" lower than the original ones and can go 40mm lower if I replace the hollow sections with some flat plates.

*edit* They also sit real niceley to the pillar and aren't as wide as first thought, they set me back around $450 from the top of my head, purchased off a fellow OzDat member. IMO perfect fit

_________________
"You stay classy OzDat"

Can we add the prices of the seats as well guys ?

_________________
]

Velo GPT (XXL) on sparco rails.

Very bloody wide, so much so I had to shave off a few mm of foam of the shoulder wings. There's now about 4-5mm between the seat's wings in the middle, and maybe 1-2mm between the wings and their respective b-pillars.

Sparco Pro 2000's
Used 180B seat rails and PRM steel side mounts.
Bolt the 180B rails in, bolt the steel side mounts onto the seets, drill a few holes in the PRM mounts and PRESTO. Sparco's fitted beautifully and aligned to the centreline of the steering wheel (ie your not sitting off to one side). They are extremely comfortable on long drives (4 hours!), and support is ace. Plus you can run 4 point harnesses through them.
Seating height is adjustable, so you can sit nice and low, or nice and high. I chose nice and low....

Price was $1200 for the two second hand (but with about 15 thousand kays on them!)

_________________
1972 Datsun 1600, S14 SR20DET Engineered (204rwkW @ 17psi.)
viewtopic.php?t=6579
#SR20Datsun @SR20Datsun

Im trying to get my hands on a sparco 2000 myself, $1050 new is the best I found.
but would love a pair if I could find them.

_________________
]

Some carbon fibre brides in a friends coupe



I've got 2 of these seats for sale if anyone is interested, new in plastic, can't afford to keep them.

how did you fit them up? and how much you after.

_________________
]

any1 looked at fitting R32 GTR seats into a 1600 ??

i find them very comfortable and are pretty cheap to come by..

if any one has any info let us know...

Yer I just missed out on a set the other day

_________________
]

hey Nik, was there any advantages in useing 180b rails?

_________________
-1969 1600 SR20

Sparco sprint's. Running sparco alloy racing brackets sitting on standard 1600 rails and mounts. ADR approved. Approx $1000 to buy and fit both seats (new). Very comfy and hug the body well. I must say though if you are a bit on the chubby side it would be a tight fit.

_________________
1928 Model A CC Pickup

while were on the seat subject what seat belts are 1600 owners useing(not harnesses) if you look in my 1st pic mine are new got them from rare spares and there crap, jam up all the time on an hill etc, and cut the sh*t out of your neck, think i need to invest in some other ones. keep the pics comeing guys this will be a good referance thread in the future

_________________
-1969 1600 SR20