Datsport, drop link retractable seatbelts...

Come down over your shoulder, not neck like 200B ron retractables do

Wouldnt have it any other way...


I have a set of three point Sablet Harnesses to sell if anyones keen PM me

They are no way going back in my car... Just like the fixed back Sparcos i took out never agen

Im now sporting Swift Gti buckets in front and Alfa GTV rear twin buckets

Simon

_________________
1971 1600 FJ20 Turbs
1968 1000 VB10 Deluxe wags

Yeah, I think I threw the 1600 ones out!

_________________
1972 Datsun 1600, S14 SR20DET Engineered (204rwkW @ 17psi.)
viewtopic.php?t=6579
#SR20Datsun @SR20Datsun

i know what you mean, i threw my original seats out back in the day, couldnt get a cent for them, then when i got defected i had to pay top dollar for a stuffed set

_________________
-1969 1600 SR20

keep em coming

_________________
-1969 1600 SR20

pro2000 (see sr20datsun), also with RPM mounts, and modified rear seat for weight reduction.

Mazda RX-7 Series 6??? I think seats in my old Green one. They looked very nice inside. Suited the 16 completely. Bit hard over long distances, and not quite as hugging as some others. But still Great. Cost me about $350 a pair I think.

_________________
Ongoing Project: 1972 Datsun 510 S13 SR20Det. http://ozdat.com/forum/viewtopic.php?f=33&t=17898
New Daily: D22 Navara (The new workhorse)
Retired 12/2016: MY98 Subaru Impreza RX
Previous Car: Restored Green 1972 Datsun 510, Hot L18

Had Recaro seats in one of my 1600's. Very comfy but sat a bit to high for me.
They were fitted to the car when I got it.

_________________
Original 77' 260Z 2+2

Recaro Designer Sport into the TRX

custom base frame with the recaro sliders made it far too high (like SBTHOMO stated)

removed the base frame and retro-fitted it to the 910 slides ones rather easily

ignore the tape - the foam has been completely destroyed after 5 years of daily use getting in and out fo the car (poor position as a result of the base frame probably didn't help - nor my increasing waist line) - i used to be a trimmer too but i cant be arsed fixing it if i can just put 100MPH tape over it...

Duct tape fixes everything

bought seat for $250 second hand

_________________
"the 910 is the poor man's 510"

black Mitusbishi Starion Turbo Seats in datsun 1600.

Seat Rails sit on rhs sections at the back using existing bolt holes

Seat rails sit on frame at front in new (wider from memory) holes.

nice minimal seat not too modern for the car, adjustable wings, lumbar support, hamstring support and neck support etc

Sorry I dont have any pics handy of them in the car, but in black they look pretty good.

_________________
69 1600 sr20de+t conversion

jealous of all the Recaro, sparco & bride seats

cheapy autotechnica seats (repco) $299 for the pair ..... they look pretty cool for the cost, but are absolutely huge.
custom rails had to be made to sit the seats in towards the middle more...

_________________
Driving takes three abilities: Accelerating, braking, and turning.
More power only helps acceleration.
Lower weight helps all three.

[quote="vdp"]black Mitusbishi Starion Turbo Seats in datsun 1600.

Seat Rails sit on rhs sections at the back using existing bolt holes[quote]

yeah I have done the same with two 40x40mm SHS just bolted them to the original rails and then have the holes for the seat on the top part of the sections since the holes are on an offset to the original ones, works great and doesn't sit on at a silly height,I've tried just using 5mm plate but the studs on the original rails dont let the seat sit flush and also the position of the seat being that low makes my legs sit on a funny angle in relation to the pedals.

_________________
"You stay classy OzDat"

It would be better if we added what vehicle the seats are installed in.

_________________
Sam-U-El/Racer135
1973 B110 - http://ozdat.com/forum/viewtopic.php?f=60&t=21539
1972 B110
1978 120Y sdn
1973 B120 - dead
1971 VB110 4dr - sold
Others:
1995 Proton Wira - daily sh#tbox

Yeah good question on the seat belts, im using corolla ke55 coupe ones in my 1600, at the front.
Dose anyone know of some retractable belts that would be good for the back??

_________________
DVSDAT VIC PLATES FOR SALE IF ANYONE'S INTERESTED

92 charade seats into a 1200 sedan.

Fairly easy to do. Just have to drill some holes, make a support for the trans tunnel side, and some washers to lift everything up to clear the original 1200 rail mechanism/s. Will have to cut some of the foam out of the base, sits too high even for my drumstick legs and a sports steering wheel haha. May try 85 barina seats (they have flat rail mounting areas so should sit lower) if they are hard foam, if not hard foam, will get a good set of 92 charade seats and cut the foam 'till they are right.

27 pics starting with this one, just keep clicking on photo to skip to next one:
http://www.facebook.com/photo.php?pid=3 ... =fbx_album

_________________
Sam-U-El/Racer135
1973 B110 - http://ozdat.com/forum/viewtopic.php?f=60&t=21539
1972 B110
1978 120Y sdn
1973 B120 - dead
1971 VB110 4dr - sold
Others:
1995 Proton Wira - daily sh#tbox

hi all

just wondering what would be a good seat to stick in my 180b dont want anything too sporty and i would like them to be easy to install if that exists??