Well, if you dont ask, you won't find out if anyone has.
| OZDAT http://www.ozdat.com.au/forum/ |
|
| gemini seats? http://www.ozdat.com.au/forum/viewtopic.php?t=20308 |
Page 1 of 1 |
| Author: | lukeymtsunny [ Wed Dec 23, 2009 12:01 pm ] |
| Post subject: | gemini seats? |
hey guys looking at new interior for my 1200/sunny. *b130) just wondering if anyone knows if gemini seats would fit in her without too much fuss, thanks guys, Luke |
|
| Author: | racer135 [ Wed Apr 28, 2010 10:09 pm ] | |
| Post subject: | Re: gemini seats? | |
hey guys looking at new interior for my sunny. *B310)
What model/year Gemini seats are you looking for?
just wondering if anyone knows if gemini seats would fit in her without too much fuss, thanks guys, Luke |
||
| Author: | RJB510 [ Wed Apr 28, 2010 10:28 pm ] |
| Post subject: | Re: gemini seats? |
Mate, I don't wanna be a pain. But these questions come up frequently and its probably something you're going to have to sus out yourself (Unless someone has already fitted the same seat to their sunny). From my experience, most seats or anything that comes from another car (even same make) will most probably require some frame welded up and bolted to the seat to make them attach to the rails and mounts. In terms of fit. Measure them relative to the old ones, or from the side of the trans tunnel to the door and then allow for some space in between, and see if that is to your liking in terms of fit and width. Depth is a little harder until you actually sit in them mounted in the car to see if they need to be raised or lowered. But its probably going to be one of those things that you'll need to get the seats, then sus out whats best to fit it. But, the flatter it is on the bottom, the easier it will be to install and make a frame for. |
|
| Author: | racer135 [ Thu Apr 29, 2010 12:36 am ] |
| Post subject: | Re: gemini seats? |
Well, if you dont ask, you won't find out if anyone has.
|
|
| Author: | RJB510 [ Thu Apr 29, 2010 1:22 am ] |
| Post subject: | Re: gemini seats? |
I concede, Good point. At least if going to the trouble to fit new seats, pick something newer and nicer unless you get the Gemi seats for free. Just read on here that some guy claims to have put N13 pulsar seats into his 1600 with no modifications. Something to think about instead of the Gemini seats. But then again, not sure how different the 1600 mounts are to the Sunny ones? http://ozdat.com/forum/viewtopic.php?f=36&t=17894 But something to think about? |
|
| Page 1 of 1 | All times are UTC+11:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|