as topics says i want to raise my 120y. where can i buy the parts needed for this. i dont want to spend a fortune either...
im new to dattos and cars with struts and leafs as i own 2 gemini's and a cortina which have coil springs all round...

cheers shane

so i guess it has been lowered and you wish to raise it back to standard?? correct?

you will need new standard height coil springs for the front.

and check if it has lowering blocks in the rear, these will be blocks between the leaf springs and the axel housing and if it does they will need removing to return the height to normal.

_________________
When the sign says "don't feed the bears", man you better not feed the bears.

ive got standard front and rear springs for a 120y if your in sydney

_________________
http://www.datnet.org
http://www.sydneydatsunclub.com

sorry should have been more specific its standars height and i want it higher
kind of want to take it offroad a bit

Is your car still running to old springs? As in the ones it came with from factory and not new king springs? The leafs should still be original but if the front springs and shockers haven't been changed in 30 years some stiff springs and shocks will lift it a bit.

_________________