OZDAT
http://www.ozdat.com.au/forum/

L series 'N1" valves?
http://www.ozdat.com.au/forum/viewtopic.php?t=22165		 Page 1 of 2
Author:  24TKman [ Mon Jun 14, 2010 1:52 am ]
Post subject:  L series 'N1" valves?
today i started dis-assembling a U67 head to raid it for the good parts to put into a A87 head im re-building.

i pulled the valves out of the A87 head and this is what i found.

[ img ]

the one on the right is the U67 valve, the one one the left is the "N1" A87 valve. both are 36mm dia.

is this a nismo valve? or am i dreaming
Author:  nick [ Mon Jun 14, 2010 2:25 am ]
Post subject:  Re: L series 'N1" valves?
'IN' for inlet valve? LOL
Author:  24TKman [ Mon Jun 14, 2010 10:07 am ]
Post subject:  Re: L series 'N1" valves?
nick wrote:
'IN' for inlet valve? LOL
now that im sober, that makes much more sense :lol:
Author:  travm182 [ Mon Jun 14, 2010 10:19 am ]
Post subject:  Re: L series 'N1" valves?
Hahaha thats hilarious! :lol:
Author:  Gary510 [ Mon Jun 14, 2010 11:12 am ]
Post subject:  Re: L series 'N1" valves?
haaaahahahahahahha
Author:  johnnypastaway [ Mon Jun 14, 2010 7:34 pm ]
Post subject:  Re: L series 'N1" valves?
haha
also wash you hand there alful :D
Author:  Nad015 [ Mon Jun 14, 2010 8:13 pm ]
Post subject:  Re: L series 'N1" valves?
:woohoo: :cheers :rofl: :cheers :woohoo:
Author:  MYDATO [ Mon Jun 14, 2010 8:30 pm ]
Post subject:  Re: L series 'N1" valves?
johnnypastaway wrote:
haha
also wash you hand there alful :D
So what do your hands look like after pulling a old head to bits? :roll:
Author:  Rat Dat [ Mon Jun 14, 2010 8:44 pm ]
Post subject:  Re: L series 'N1" valves?
Well if you hot bathe em first they wont be that dirty... then again that's bullshit... those hands look rather clean lol.
Author:  NC1600 [ Tue Jun 15, 2010 12:25 pm ]
Post subject:  Re: L series 'N1" valves?
sorry but thats gold :rofl:
Author:  SIX-TEN [ Tue Jun 15, 2010 12:36 pm ]
Post subject:  Re: L series 'N1" valves?
Hahaha nice one!
Author:  24TKman [ Tue Jun 15, 2010 2:32 pm ]
Post subject:  Re: L series 'N1" valves?
i even giggle every time i open the thread :giggle:
Author:  James May [ Tue Jun 15, 2010 3:59 pm ]
Post subject:  Re: L series 'N1" valves?
Man, that's pretty funny. Still, I've said/done sillier things.
Author:  nick [ Tue Jun 15, 2010 6:44 pm ]
Post subject:  Re: L series 'N1" valves?
24TKman wrote:
nick wrote:
'IN' for inlet valve? LOL
now that im sober, that makes much more sense :lol:
Just don't ask me what a 710 cap is. :P
Author:  Mr Camouflage [ Tue Jun 15, 2010 11:10 pm ]
Post subject:  Re: L series 'N1" valves?
Looks like your missing an "X3" valve. :giggle:
Page 1 of 2 All times are UTC+11:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/