OZDAT http://www.ozdat.com.au/forum/ |
|
s13 silvia rear seat -> 610 SSS http://www.ozdat.com.au/forum/viewtopic.php?t=23883 |
Page 1 of 1 |
Author: | burubado [ Fri Nov 26, 2010 9:05 pm ] |
Post subject: | s13 silvia rear seat -> 610 SSS |
Just an FYI if the rear seat in your 610 is rooted, I've just fitted the base of an s13 rear seat in my SSS the back is do-able, but you have to mount a hinge and clips. I just fitted the base, nice and contoured and weighs like 1/2 the factory seat. will eventually get it retrimmed in black vinyl to match the rest of the interior. best thing, it cost me $1.25 on ebay hope this helps someone! |
Author: | Anth510 [ Fri Nov 26, 2010 11:06 pm ] |
Post subject: | Re: s13 silvia rear seat -> 610 SSS |
get some pics up mate |
Author: | Rat Dat [ Sat Nov 27, 2010 7:55 am ] |
Post subject: | Re: s13 silvia rear seat -> 610 SSS |
Yeh pics |
Author: | spiff [ Sun Nov 28, 2010 6:42 am ] |
Post subject: | Re: s13 silvia rear seat -> 610 SSS |
Does anyone know if the rear seat of a 910 is much wider than the 610 ? I might have a set of front and rear seats from a R34 on hands, would be cool to have them in my 910 |
Author: | burubado [ Fri Dec 03, 2010 11:22 am ] |
Post subject: | Re: s13 silvia rear seat -> 610 SSS |
Ok, I apologise in advance for the sh*t images. original seat, water damaged from a missing window seal (now replaced) and painted black to try and disguise it. s13 seat: the back, it's a bit too skinny down the bottom so would be a bit gappy, plus, it doesn't use the hook and screw system the 610 uses, it uses a hinge and clip system, so harder to install. So i didn't bother - mine is covered anyway. I'll get them both trimmed in black vinyl at some stage so they match the front seats I'm going to get. |
Author: | sutho510 [ Fri Dec 03, 2010 5:40 pm ] |
Post subject: | Re: s13 silvia rear seat -> 610 SSS |
im doing the same set up in my 510 to give it the bucket look to match the front but im hoping to use the backrest aswel |
Author: | burubado [ Mon Dec 06, 2010 12:31 pm ] |
Post subject: | Re: s13 silvia rear seat -> 610 SSS |
If you want to use the back rest get the hinges and clips. alternatively, you may be able to set up the seat so it works like the factory hook system...... I am still contemplating using the backrest, but time is lacking at the moment. |
Author: | Anth510 [ Mon Dec 06, 2010 12:59 pm ] |
Post subject: | Re: s13 silvia rear seat -> 610 SSS |
looks like a nice fit. Where are you going to source the front buckets from, yahoo? |
Author: | burubado [ Mon Dec 06, 2010 4:27 pm ] | |
Post subject: | Re: s13 silvia rear seat -> 610 SSS | |
looks like a nice fit. Where are you going to source the front buckets from, yahoo?
That's how I've sourced most of my other parts, so most likely, yes.I do know a few people who go to Japan quite regularly though, so I may find another way. |
Author: | SIX-TEN [ Mon Dec 06, 2010 4:32 pm ] |
Post subject: | Re: s13 silvia rear seat -> 610 SSS |
Talk to Dan aka Green510 he helped me bring in the Work Equip 03s i had bought for my 180B. |
Author: | burubado [ Mon Dec 06, 2010 6:11 pm ] |
Post subject: | Re: s13 silvia rear seat -> 610 SSS |
I get Jesse Streeter to send most of my stuff. The service he provides is brilliant. |
Author: | Red510 [ Mon Dec 06, 2010 10:19 pm ] |
Post subject: | Re: s13 silvia rear seat -> 610 SSS |
i've been looking at S14 seats, they measure up good for the 510, but haven't sourced any for a trial fit before handing over $$. maybe $1.25 specials on ebay are the go |
Author: | burubado [ Tue Dec 07, 2010 11:21 am ] |
Post subject: | Re: s13 silvia rear seat -> 610 SSS |
i wasn't going to spend much more than that on a back seat i'd have a hard time reselling..... lol the guy was only 15 mins drive away too |
Page 1 of 1 | All times are UTC+11:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |