| OZDAT http://www.ozdat.com.au/forum/ |
|
| 1600 front struts http://www.ozdat.com.au/forum/viewtopic.php?t=26645 |
Page 1 of 1 |
| Author: | ashdat1600 [ Mon Sep 05, 2011 7:53 pm ] |
| Post subject: | 1600 front struts |
I was just wondering what to use for the front struts on my 1600, I don't care if the are coilovers, I what to run 17 in rims of some sort, I also want to run r32 or r33 4 spot gtr calipers, Thanks Ash |
|
| Author: | sik510 [ Fri Sep 23, 2011 8:15 pm ] |
| Post subject: | Re: 1600 front struts |
Import HR31 struts will have 100mm caliper bolt spacing so you can run the GTR Brembo calipers. They should bolt straight in, but you will need a set of sheer load spacer rings where the struts mount at the bottom as the 1600 has a smaller location diameter. If you are running 17's then the 5 stud hub should suit you, if you need the 114.1mm 4 stud pattern I believe swapping to an S12 hub will do the job. Please correct me if I am wrong anyone. |
|
| Author: | JK [ Fri Sep 23, 2011 8:30 pm ] | |
| Post subject: | Re: 1600 front struts | |
Import HR31 struts will have 100mm caliper bolt spacing so you can run the GTR Brembo calipers. They should bolt straight in, but you will need a set of sheer load spacer rings where the struts mount at the bottom as the 1600 has a smaller location diameter.
HR31 is 4x114.3
If you are running 17's then the 5 stud hub should suit you, if you need the 114.1mm 4 stud pattern I believe swapping to an S12 hub will do the job. Please correct me if I am wrong anyone. |
||
| Page 1 of 1 | All times are UTC+11:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|