Yes, can do.
I'll try to get it done tonight.
I'll do a hi res scan so you can zoom in and actually see something that doesn't resemble a blurrrrrrrrr
| OZDAT http://www.ozdat.com.au/forum/ |
|
| blown fuses STANZA http://www.ozdat.com.au/forum/viewtopic.php?t=26932 |
Page 1 of 1 |
| Author: | heathr [ Sun Oct 09, 2011 9:44 am ] |
| Post subject: | blown fuses STANZA |
i keep blowing the engine control fuse in my stanza any ideas what could be causing this? cheers |
|
| Author: | Rod F [ Sun Oct 09, 2011 12:44 pm ] |
| Post subject: | Re: blown fuses STANZA |
Get a wiring diagram and work out what's connected to that circuit. Could be a short somewhere. How often does it blow? |
|
| Author: | Hazzadat [ Wed Dec 07, 2011 1:56 pm ] |
| Post subject: | Re: blown fuses STANZA |
Mines doing exactly the same thing, did you end up finding the fault? If so, mind filling me in? |
|
| Author: | Nissanman [ Wed Dec 07, 2011 2:40 pm ] |
| Post subject: | Re: blown fuses STANZA |
I have the A10 Service Manual with a fold out wiring Diagram. Which fuse is it that blows? According to the diagram there are 8 fuses. ACCessory Feed: - W - 15A - Wiper & Washer motors HR - 15A - Heater IGnition Feed: - M - 10A - Reverse lamp switch [M/T], Inhibitor switch and Kick down solenoid [A/T], Turn signal flashers, Oil pressure light DEF - 20A - rear window DEFroster EX - 10A - Auto choke relay, Voltage Regulator, Vacuum cut solenoid and Run on solenoid Battery feed: - HS - 15A - Hazard flasher and various switches CT - 15A - Lights HC - 15A - Horn plus and there is 1 Fusible Link off the Battery + post. |
|
| Author: | heathr [ Thu Dec 08, 2011 12:16 pm ] |
| Post subject: | Re: blown fuses STANZA |
yep found the problem some D!ck had plugged 2 wires 2gether under the bonnet that obviously didnt go together cos they were on the same line. geez.. |
|
| Author: | chickenwire [ Wed May 22, 2013 11:59 am ] |
| Post subject: | Re: blown fuses STANZA |
Graeme, Any chance you could scan the Stanza wiring diagrams for me? I'm putting my rally car back together so I want to design how the additional wiring will integrate with the factory loom. Cheers, Aaron. |
|
| Author: | Nissanman [ Wed May 22, 2013 2:42 pm ] |
| Post subject: | Re: blown fuses STANZA |
Yes, can do. I'll try to get it done tonight. I'll do a hi res scan so you can zoom in and actually see something that doesn't resemble a blurrrrrrrrr
|
|
| Author: | Nissanman [ Mon May 27, 2013 1:57 pm ] |
| Post subject: | Re: blown fuses STANZA |
Sorry I have taken so long to reply. It turns out I have already scanned the BE foldout and it is located here: - http://www.mediafire.com/?pp554vjif71mh It is a big file but zooming in is good  Let me know if you need anything else. |
|
| Author: | chickenwire [ Mon May 27, 2013 2:47 pm ] |
| Post subject: | Re: blown fuses STANZA |
Fantastic, thanks a ton. Cheers, Aaron. |
|
| Page 1 of 1 | All times are UTC+11:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|