| OZDAT http://www.ozdat.com.au/forum/ |
|
| nissan junor 1900 http://www.ozdat.com.au/forum/viewtopic.php?t=28569 |
Page 1 of 3 |
| Author: | craigt [ Thu Apr 19, 2012 9:13 am ] | |||
| Post subject: | nissan junor 1900 | |||
found one of these nissan junor 1900s on a farm and was woundering if it was a ute worth working with,any info would be useful
|
||||
| Author: | Dave [ Thu Apr 19, 2012 10:15 am ] |
| Post subject: | Re: nissan junor 1900 |
Hard to say - you don't see them too often, but there is probably a fairly limited number of people who would pay much for them. It would be nice to see it saved if you could find the right person. They are supposedly more like a little truck, rather than a big ute (if that makes sense). The engine alone may be worth something to the right person, it's the same 1900 as used in some early Cedric's and the crank can be used as a "stroker" crank in some of the early Datsun Fairlady 3-main bearing engines. |
|
| Author: | MAG86 [ Thu Apr 19, 2012 10:15 am ] |
| Post subject: | Re: nissan junor 1900 |
Its an N40 (model variant) 1962 onwards, has a 'H-series' engine, a small version of the H20 kinda thing. Shares alot of parts with the C31 Cedric (although the cedric engine had better compression) I have seen ONE ever, done up as a 'rat-rod' tow truck. Was very cool |
|
| Author: | MAG86 [ Thu Apr 19, 2012 10:15 am ] |
| Post subject: | Re: nissan junor 1900 |
*double post...* |
|
| Author: | Dato200B [ Thu Apr 19, 2012 1:10 pm ] |
| Post subject: | Re: nissan junor 1900 |
Would certainly make a cool project. Reminds me of an early toyota stout i saw all done up. It may not have a huge value but it would still look awesome all done up and be a very rare piece. |
|
| Author: | craigt [ Thu Apr 19, 2012 4:31 pm ] |
| Post subject: | Re: nissan junor 1900 |
this 1900 ute has a H20 engine in it,didnt get a real good look under it as there where a few hornets nests,next time in up im going to pull it to clear ground and sort them hornets out and get under it for a real good peek,i know its got a colum manual and the tray has no timber on it,keep u posted |
|
| Author: | craigt [ Tue Aug 14, 2012 10:57 am ] | ||
| Post subject: | Re: nissan junor 1900 | ||
 shes a pearler near on no rust,a 20c hole under the drivers floor and a little in the guards,the brahes dont work as they have been pulled apart but the owner tells me it was driven onto a trailer and then driven off,i havent tryed starting it,thats the next thing to do 
|
|||
| Author: | craigt [ Sat Aug 18, 2012 8:18 pm ] |
| Post subject: | Re: nissan junor 1900 |
could anyone make a surgestion as to where would be a good place to find parts for this truck,any help would be grate,iv been searching the net with very little sucess |
|
| Author: | craigt [ Sun Aug 19, 2012 9:13 pm ] |
| Post subject: | Re: nissan junor 1900 |
if u google nisan junior type 40 what sort of price range do u c |
|
| Author: | prince_skyline [ Tue Aug 21, 2012 1:07 am ] | |
| Post subject: | Re: nissan junor 1900 | |
could anyone make a surgestion as to where would be a good place to find parts for this truck,any help would be grate,iv been searching the net with very little sucess
What are you after exactly?
|
||
| Author: | craigt [ Fri Aug 24, 2012 10:33 pm ] | |||||
| Post subject: | Re: nissan junor 1900 | |||||
hi i will be after all bushes for the suspension and depending on the engines compression a full recon kit for it,all new brake parts,shocks,with the h20 engine is there a way of telling weather the engine is a 3 main crank bearing or five main crank bearing engine just by looking at it or do u need to pull it down to realy see?
|
||||||
| Author: | craigt [ Sat Sep 15, 2012 8:52 pm ] |
| Post subject: | Re: nissan junor 1900 |
it runs fine,going to need a carby kit ,wheel cylinders and a radiator core replaced, im amazed just how slow it goes in 1st gear,been driving it around the padock |
|
| Author: | dats-son [ Sat Sep 15, 2012 11:35 pm ] |
| Post subject: | Re: nissan junor 1900 |
yesss!!! what a save!! looks so cool,very nice! any plans for her yet as in long term?? gonna spend thousands or just as much as you can get away with? how much did it cost you?? |
|
| Author: | craigt [ Thu Sep 20, 2012 7:38 pm ] |
| Post subject: | Re: nissan junor 1900 |
its going back to a bare cab,quoted $700 to sand blast it,then its cut and weld,engine sounds like it only needs a water pump but it dosent get hot,the radiator has a slight leak in the top tank but not in the core,drove it around my land and all the mechnics work except the brakes,as for cost its an airlume,iv been searching for new parts but it seems like the homer has the bits i need,the junior dosent seem to have any parts avalibul, |
|
| Author: | merlinscedric [ Sun Sep 23, 2012 2:50 pm ] |
| Post subject: | Re: nissan junor 1900 |
Great truck! Save it! i have lots of picks of the fire truck version in Japan from when i was last there. We got the Cedric 31 in Canada(i have one of 3 left), but not the truck...We also got the Sunny b10- no fastbacks or wagons, just sedans. We got ute FJ40's , patrol SWB g60's, datsun 222, 320, 520, 521's as well. I recently found a 1962 nissan transit bus i'm trying to save lol. |
|
| Page 1 of 3 | All times are UTC+11:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|