OZDAT
http://www.ozdat.com.au/forum/

old-tins z18et 1600
http://www.ozdat.com.au/forum/viewtopic.php?t=29186		 Page 1 of 1
Author:  old-tin [ Wed Jul 11, 2012 12:51 pm ]
Post subject:  old-tins z18et 1600
hi guys i thought i would start a build thread for my 1600 that i have had for about 3-4 years.

[ img ]

didn't look to bad (apart from the sh*t cooler and big wheels) BUT as with most old cars the wiring was so bogy it court fire within 1 month of buying it :lol: so first of was a re wire and re build the break booster that was shaged.
it did have a bit going for it l20 with flat top pistons,massive cam, 32/36 weber, 280zx gear, r180 diff, 240k struts and breaks.
The l20b has had the head replaced with a ported w53, stranded sss cam, twin su's that were promptly followed by twin dellortos and an s2 dizzy.
after a few years driving it as a daily she has been pulled of the road for a rebuild.
the windows were left in right to the end because of the sh*t wether as it was all unfortunately done outside :oops: but still turned put ok :P

[ img ]

[ img ]

[ img ]

[ img ]

[ img ]

[ img ]

[ img ]
Author:  old-tin [ Wed Jul 11, 2012 1:14 pm ]
Post subject:  Re: old-tins z18et 1600
[ img ]

[ img ]

new sss dash from japan with dash and engine harness :D 8) 8)

[ img ]

[ img ]

[ img ]

[ img ]
Author:  blatsun [ Wed Jul 11, 2012 1:54 pm ]
Post subject:  Re: old-tins z18et 1600
Hi looks great with sss dash and wheel...
Kinoko beige now?
Author:  DatsAndy [ Wed Jul 11, 2012 3:14 pm ]
Post subject:  Re: old-tins z18et 1600
Mmmm Very Nice
Author:  Bozo510 [ Wed Jul 11, 2012 3:19 pm ]
Post subject:  Re: old-tins z18et 1600
Looks great man, chuck up some pics of your cooler setup. With the 400x300 coolers, just shows how much of a better fit they are with that extra 50mm less.
Author:  old-tin [ Wed Jul 11, 2012 7:28 pm ]
Post subject:  Re: old-tins z18et 1600
thanks fellers. yep its koniko beige 8) the 400x300 coolers do fit well but its not fitted yet just sitting where the radiator should be.

z18et is at the engine builder but i don't expect to see it any time soon as its been there for a year already :lol: its a good thing he dose a good job.

[ img ]

[ img ]
Author:  DatsAndy [ Wed Jul 11, 2012 8:11 pm ]
Post subject:  Re: old-tins z18et 1600
So an L series 1200 sedan A Z18 1600 and whats this i see ? a 1200 ute. Still got it what driveline is in him ?
Author:  old-tin [ Wed Jul 11, 2012 8:33 pm ]
Post subject:  Re: old-tins z18et 1600
yep still got him, doing it up for my sister :lol: its stranded a12 4speed with 200b coil over struts rx4 breaks and small can booster. soon to be a ga16 maybe :wink:

i got my eye on a few more datos to just need to build my new shed (not building another car in the wether :impatient: )
Author:  CASUNNY [ Wed Jul 11, 2012 10:07 pm ]
Post subject:  Re: old-tins z18et 1600
Your datto has come along way , keep the updates coming.

Have you still got the wheels in the first picture ? if so do you want to to sell them =)
Author:  old-tin [ Wed Jul 11, 2012 10:46 pm ]
Post subject:  Re: old-tins z18et 1600
sorry Graham there long gone. but the new owner might sell.
Author:  CASUNNY [ Wed Jul 11, 2012 11:09 pm ]
Post subject:  Re: old-tins z18et 1600
All good , let me know if he does.

Good to see you made a build thread on your 1600.
Page 1 of 1 All times are UTC+11:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/