OZDAT
http://www.ozdat.com.au/forum/

Transferring car from S.A rego to W.A
http://www.ozdat.com.au/forum/viewtopic.php?t=30008
Page 1 of 1

Author:  sld910 [ Thu Nov 08, 2012 11:17 am ]
Post subject:  Transferring car from S.A rego to W.A

Hi can anyone tell me how strict they are when taking a car over the pits for rego transfer?

Author:  Mr Camouflage [ Thu Nov 08, 2012 11:45 am ]
Post subject:  Re: Transferring car from S.A rego to W.A

Shouldn't need an inspection:
Quote:
License a vehicle from interstate
If a light vehicle coming to Western Australia from the Eastern States meets the criteria below it can be licensed without the need for an examination.
Light vehicles include:
Motor cars
Motorcycles, including mopeds
Goods/ Commercial vehicles
Trailers, including trailer plant
Caravans.

Criteria
The vehicle must meet the following criteria:
Has a tare weight and aggregate weight not exceeding 4,500kg. If you are unable to provide proof of the vehicle’s tare weight you may be required to obtain a weighbridge certificate.
Is currently licensed in an Australian jurisdiction
There is evidence that the vehicle is currently licensed in your name and has been for a continuous period of at least 12 months at the time of application (unless the vehicle is less than 12 months old).
We will accept any of the following issued in your name, dated more that 12 months ago:
vehicle licence or renewal document; both current and previous;
an offer to purchase, bill of sale or receipt;
an inspection receipt from a licensing authority or Approved Inspection Station; or
an original owner’s hand book or similar, issued with a factory new vehicle.
Has an approved immobiliser fitted if required (note some exemptions apply - refer to our immobilisers web page)
The vehicle is unmodified; or has been modified and issued with a modification permit from an Australian Jurisdiction; or has a modification that does not require approval
The vehicle does not require an annual examination [taxi, hire vehicle, bus, driving school vehicles, vehicles with more than 13 seats (including the driver), vehicles used to carry children to and from school (8 seats or more)].
If you are unable to provide proof of the vehicles’ tare weight you may be required to obtain a weighbridge certificate.
If your vehicle does not meet the above criteria it will need to be examined before it can be licensed in Western Australia. Go to Get your vehicle examined. for more information on how to do this.
You will be required to provide proof that the vehicle will be garaged primarily in this state. You will also be required to provide suitable proof of identity documents before the vehicle can licensed in your name.
You will need to attend a Driver and Vehicle Services Centre or regional Agent to license the vehicle. To save you time, we have provided the 'Interstate vehicle licence (without inspection) application' (Form MR20) below. If possible you can complete and bring the form with you (forms are also available at a Driver and Vehicle Services Centre or regional Agent).
You will also need to remove your vehicle number plates and bring them with you to the Driver and Vehicle Services Centre or regional Agent. Your old plates must be exchanged for a set of Western Australian plates upon being issued with a Western Australian vehicle license. Please note that the Department does not provide a license plate removal service.

Author:  sld910 [ Thu Nov 08, 2012 11:52 am ]
Post subject:  Re: Transferring car from S.A rego to W.A

Thanks Mr Camouflage :)

Page 1 of 1 All times are UTC+11:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/