OZDAT
http://www.ozdat.com.au/forum/

200b sr20_10bolt h190 tail shaft Q?
http://www.ozdat.com.au/forum/viewtopic.php?t=30097		 Page 1 of 1
Author:  200bee stings [ Mon Nov 19, 2012 7:53 pm ]
Post subject:  200b sr20_10bolt h190 tail shaft Q?
Hi all, I have recently put a Sr20 and ten bolt H190 into my 200B. The diff went in perfectly, no dramas, apart from the wheels stick out a tad more (which I reckon looks pretty good) I have tried to mount the standard 200B tail shaft to the h190 diff flange and the holes don't match up, I am just wondering about my options whether I fit a s3 Bluebird end to the tail shaft after the uni or maybe, when I get the diff shortened, can the diff place re drill holes to suit the tail shaft?

Any info would be muchly appreciated.

Cheers,

Chris
:thumbsup:
Author:  200bee stings [ Wed Nov 28, 2012 8:35 pm ]
Post subject:  Re: 200b sr20_10bolt h190 tail shaft Q?
Need a tail shaft that will bolt up to this flange and was thinking bluebird but was told Any flange from a Hitachi diffed car will do ? but am not sure?
Attachment:
[ attachment ]
IMAG1138.jpg [ 1.45 MiB | Viewed 1573 times ]
Author:  200bee stings [ Wed Nov 28, 2012 8:42 pm ]
Post subject:  Re: 200b sr20_10bolt h190 tail shaft Q?
standard 200b tail shaft the hole are slightly more wider apart than the ones on the diff
Attachment:
[ attachment ]
IMAG1158.jpg [ 1.79 MiB | Viewed 1572 times ]
Author:  DatsAndy [ Wed Nov 28, 2012 9:05 pm ]
Post subject:  Re: 200b sr20_10bolt h190 tail shaft Q?
Yeah series 2 or 3 bluebird tailshaft should work even stanza as long as there H series diff H165,H190. Come to think of it datsun sunny Auto H150 will work and 120y Auto H150 but the previous 2 have to be Auto as mentioned in order to fit SR gearbox. you will find one that matches at both ends but may still need to slightly shorten one of them.
Author:  200bee stings [ Thu Nov 29, 2012 5:09 pm ]
Post subject:  Re: 200b sr20_10bolt h190 tail shaft Q?
cheers thanks for the info this helps a lot. I'm not to fussed about getting it shortened at both ends if i have to. should make my search a bit easier any how .Cheers
Page 1 of 1 All times are UTC+11:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/