hey just wounding if r31 lca , stub axle and coilover fit a s3 bluebird

Are the blue bird control arm's same as 180b? If so the centre bush sleeve is about 2mm to small, you can replace the bushes with 180b items if this is the case. But I've had a mate with whole s13 front end in his but he used the bluey lca and just bashed the ball joint in and bolted it to the knuckle.

bluey and 180b are different,180b is like 1600

_________________
68 510 - soon to be restored into a replica 68sss
69 510 - current build - L20b turbo
91 GT turbo legacy
GET THAT DATSUN DIFFERENCE!

thanks man s13 stuff is so dear i was trying to something cheaper

s13 stuff is soo cheap now, get on some forums and drift sale facebook groups. What r31 coilovers where you going to use?

cool ill try them ,, i donno i thought it would be cheaper

They are the same however R31/Bluebird LCAs are 10mm shorter than S13.

I have a set spare of S13 LCAs at home if you still wish to run them. Though depending on your rim it may be preferable to run a shorter arm which might let a slightly lower offset rim in?

_________________
910 S3 Bluebird - FJ20ET, E85, IRS, 5 Speed, 4.4 LSD
910 S3 TRX - RB25DET, Coilovers, S13 Front end, Power Steering
RA23 Celica - 18RG, Twin 40mm Webers, Coilovers, rolling on SSR mesh 15x7 0s.

how much do you want for the s13 lca

Seriously man I pay about 50-100 for sr20 front turbo brakes and control arms knuckles hubs etc. Then you spend 400 on used coilovers. Cheap cheap.

Where from mate ??

An import in perth called mr mayhem, doesn't run a shop it's all from home but he gives you a receipt and it's on the books.
maytech@bigpond.com