OZDAT
http://www.ozdat.com.au/forum/

vn allternator upgrade please help if you've done it
http://www.ozdat.com.au/forum/viewtopic.php?t=30387		 Page 2 of 2
Author:  stoutcatcher [ Fri Jan 11, 2013 2:53 pm ]
Post subject:  Re: vn allternator upgrade please help if you've done it
I ended up getting a second hand vl one. I figured for $50 it was worth a try. I've got it on but I don't have it charging.

For wiring I have the main positive wire going to the big positive post. this wire goes straight to the bat positive via a fuse.

The original black wire on a spade clip is connected to the d- post

I have tried the other 2 wires which plug into the bushes both ways round,

but still only 12 volts at the battery
Author:  stoutcatcher [ Fri Jan 11, 2013 4:15 pm ]
Post subject:  Re: vn allternator upgrade please help if you've done it
Well I got it working by accident, by bridging the bare wires going to the brushes.

I don't understand why this has made it work though?
Author:  nick [ Fri Jan 18, 2013 1:46 am ]
Post subject:  Re: pulling apart vn alternator
stoutcatcher wrote:
Am I missing something or do I have the wrong alternator?
stoutcatcher wrote:
Now I am wondering if there were different models of l series alternators and if I have the wrong one for the job.
Yes there are more than one type of alt.
In the thread below i used BOSCH alternators.

http://ozdat.baysidetechsupport.com.au/ ... 6d4c790720
Author:  stoutcatcher [ Fri Jan 18, 2013 8:51 am ]
Post subject:  Re: vn allternator upgrade please help if you've done it
thanks
Author:  Niscomm [ Sat Dec 10, 2016 7:53 am ]
Post subject:  Re: vn allternator upgrade please help if you've done it
Hi newbie here made the rookie mistake of posting before looking at at lurches how to video.
I posted in general discussion "Alternator holy grail" I don't know how to bring it to this posting so if you have a chance check it out it saved me a lot of stuffing around in the end. Cheers
Author:  SR20Datsun [ Fri Dec 16, 2016 11:22 am ]
Post subject:  Re: vn allternator upgrade please help if you've done it
I have just moved the post into the EFI section and here is the link.
http://ozdat.com/forum/viewtopic.php?f=2&t=34404
Page 2 of 2 All times are UTC+11:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/