| OZDAT http://www.ozdat.com.au/forum/ |
|
| Clutch for l18 turbo http://www.ozdat.com.au/forum/viewtopic.php?t=30919 |
Page 1 of 1 |
| Author: | skitzone [ Mon Apr 01, 2013 8:42 pm ] |
| Post subject: | Clutch for l18 turbo |
Anyone make one of the shelf that'll hold up to it? And single mass flywheels? |
|
| Author: | Dave [ Mon Apr 01, 2013 10:52 pm ] |
| Post subject: | Re: Clutch for l18 turbo |
Z18 flywheel and clutch ? |
|
| Author: | old-tin [ Mon Apr 01, 2013 11:01 pm ] | |
| Post subject: | Re: Clutch for l18 turbo | |
Z18 flywheel and clutch ?
z18 flywheel is 6 bolt l18 is 5
|
||
| Author: | Dave [ Mon Apr 01, 2013 11:51 pm ] |
| Post subject: | Re: Clutch for l18 turbo |
Bugger. I've got one in the shed to use on my supercharged L18, should have checked it more closely before I stashed it away....... |
|
| Author: | datdrift [ Tue Apr 02, 2013 10:18 am ] |
| Post subject: | Re: Clutch for l18 turbo |
grab a 720 L18w flywheel and fit a new excedy clutch. the 720 flywheel is like the L6 units they run a 9" disk oppose to the std 8" on most L4's |
|
| Author: | skitzone [ Tue Apr 02, 2013 10:27 am ] |
| Post subject: | Re: Clutch for l18 turbo |
Both the flywheels I have are off W motors, I just always got told you don't reuse dual mass? |
|
| Author: | skitzone [ Tue Apr 02, 2013 10:27 am ] |
| Post subject: | Re: Clutch for l18 turbo |
Can I use a z18 clutch on my l18 flywheels? |
|
| Page 1 of 1 | All times are UTC+11:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|