Do it, life changing. 3-4 mins spraying. 2 hour wait scourer off within 2-3 minutes. I used the easy off bam brand.

Great stuff, how much for that stuff whats the ingredient?
Tried a few with lactic acid even but best result has been
using the 5 minute oven cleaner stuff for $3 but sprays on
like a knob with a faulty and sticky foreskin.

Dno it's the woman buys I just heard oven cleaner before n I was looking at those wheels and sighing... Hard.
I can't honestly believe how well it worked saved me so much time!

Great wheels what are they?

Hmmm, I've been putting off cleaning a set of filthy old TRX rims to put on the trailer, will give this a go on the weekend

_________________
1970 ex Group A Rally P510
1971 P510
1972 180B SSS
1965 SP310 Fairlady
1966 SP311 Fairlady

On second thought, no I won't. You've melted the centre right out of the wheel

_________________
1970 ex Group A Rally P510
1971 P510
1972 180B SSS
1965 SP310 Fairlady
1966 SP311 Fairlady

Trust you dave

D they are auto Strada by Pirelli I've reversed the rears so they're now 15x7 -28 I'll be running +28 fronts with 20mm spacers. 50mm rear flares 25mm fronts.

Excuse 4wd spec. Front coil overs are already not captive n I hate helpers, need new shorter inserts and haven't put the r200/disc rear subframe in yet.

You have to be carful with oven cleaner on alloy parts as it contains costic witch is corrosive to alloy. I personally would not use it on things like carbs or heads.

Oven cleaner is nasty and glad the Bam thank you Maam does the job if patient.

Nice wheels and will look awesome, whats planned for the heart?

l18w
9:1 compression head, 4wd pistons with a w53 with reshaped combustion chambers
280zx valves
292 degree 10.5 mm lift camshaft
40mm? ports from memory
28/71 turbo on a direct fit 80's draw through assembly
45 dcoe weber in front of turbo
2.5" dump pipe with 9 psi external waste gate.

Front suspension is volvo 4 pots, threaded struts with 240k inserts (still to long), rose jointed adjustable control arms and k-mac sway bar.

Rear is tokico shocks, 1100 lbs springs, r200 3.91 diff, commodore rear disc brakes, slotted for camber adjust with a 3" hole for exhaust.

whereabouts are you?
Theres a Z22 engine and L20b engine at the local wreckers for 2145cc combo with
good rod stroke ratio, bit taller but factory 87mm bores can go 89 without issues.
I just thought since its turbo will need engineering anyway so why not go with the
most capacity you can get with good reliably for boost?

BTW the Easy Bam I went to buy tonight but there were 3 one pump spray the other
atomised spray all said the same thing nothing about oven but found the ingredient
in the can atomised stuff is sodum hydroxide 3% which means if thats the case
household bleach comes in 4% strength and with lemon scent for 1.14 at coles.

The pump spray stuff was formic acid 2.5% which I think termites use to sh*t on ants
but not going to put my parts into a termite mound

Finally got around to it - awesome

Quick spray with the oven cleaner, wait for half an hour, hit them with the Karcher and they look awesome

_________________
1970 ex Group A Rally P510
1971 P510
1972 180B SSS
1965 SP310 Fairlady
1966 SP311 Fairlady

which one did you get Dave there are 3 on my supa with different ingredients?
the one with sodum hydroxide 3% or formic acid 2.5%

Where is this z22???