| OZDAT http://www.ozdat.com.au/forum/ |
|
| 411 front brake cylinders http://www.ozdat.com.au/forum/viewtopic.php?t=31024 |
Page 1 of 1 |
| Author: | shano13 [ Fri Apr 19, 2013 9:20 pm ] |
| Post subject: | 411 front brake cylinders |
hey guys n gals, i have a 66' 411 wagon and am looking to freshen up my front brakes as one of the cylinders is rooted. does anyone know where i can get new front upper and lower cylinders from? i may as well do both sides while i am at it. any info would be awesome. there are a couple of ebay, one left and one right. but need two of each. thanks!!! shane |
|
| Author: | Dave [ Sat Apr 20, 2013 11:30 am ] |
| Post subject: | Re: 411 front brake cylinders |
Are 411 front brakes the same as 410's ? If so, 410's are the same as 1500 fairlady's (SP310). You might pick up a set from some of the Datsun Roadster parts suppliers in the US. I was lucky enough to pick up a set of 410 ones cheaply for my Fairlady a year or so back, but normally they are pretty expensive from the fairlady suppliers. Getting a brake place to re-sleeve yours may be cheaper ? http://www.datsunparts.com/Brakes-1500 |
|
| Author: | shano13 [ Sat Apr 20, 2013 12:26 pm ] |
| Post subject: | Re: 411 front brake cylinders |
im not 100% sure if they are the same or not. all i know is that the P411 that i have, the cylinders are 1". a couple are here on ebay: left hand side (L1): http://www.ebay.com/itm/Datsun-41103-18 ... 64&vxp=mtr right hand side (R1): http://www.ebay.com/itm/Datsun-Roadster ... 88&vxp=mtr eventually i want to do a disc conversion, but for now, i just want to get her on the road. so i may just replace the faulty ones and leave it at that. |
|
| Page 1 of 1 | All times are UTC+11:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|