OZDAT http://www.ozdat.com.au/forum/ |
|
Aarons 1600 project http://www.ozdat.com.au/forum/viewtopic.php?t=31200 |
Page 1 of 8 |
Author: | Scottie [ Wed May 15, 2013 12:01 pm ] |
Post subject: | Re: Aarons 1600 project |
Wow! Looks like an awesome build. i have thought about doing the same to the gutters myself if i even did a full on build. Good work! |
Author: | aaron730670 [ Wed May 15, 2013 12:36 pm ] | |
Post subject: | Re: Aarons 1600 project | |
I have thought about doing the same to the gutters myself if I even did a full on build.
Well they were rusted through in a few spots, it seemed a easier solution then repairing
|
Author: | k-man 79 wagon [ Wed May 15, 2013 3:36 pm ] |
Post subject: | Re: Aarons 1600 project |
this thing is awesome man |
Author: | nick [ Wed May 15, 2013 6:03 pm ] |
Post subject: | Re: Aarons 1600 project |
Wheres the bootlid catch? |
Author: | chefly [ Wed May 15, 2013 11:01 pm ] |
Post subject: | Re: Aarons 1600 project |
your build looks awesome mate, good luck with it |
Author: | hailest [ Sat May 18, 2013 9:03 pm ] |
Post subject: | Re: Aarons 1600 project |
Fantastic work Aaron! |
Author: | aaron730670 [ Tue May 21, 2013 11:53 pm ] |
Post subject: | Re: Aarons 1600 project |
Cheers for comments lads I been playing with the wiring the last few weeks, allot of the original body loom was hacked into many times so had to replace most of it. Working on setting up the headlights (4 x narva H4 globes) and using stock switches, so i can have a stock setup of lowbeams on the outer and flick of the stalk all four on highbeam. Nothing new there but if i flick toggle switch first and then use the stock switches with the help of a relay i can have all 4 on low beam flick the stalk and have all 4 on high. All up it takes a 3 relays and 1 change over relay, i will put up a wiring diagram if anyones interested. I was going to add a S13 aircon unit and after playing with the wiring and working it all out (many hours), i decided to buy a vintage air system just because it's smaller. theres also some awesome computer and SR engine harness work from PLMS there. |
Page 1 of 8 | All times are UTC+11:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |