| OZDAT http://www.ozdat.com.au/forum/ |
|
| Hydraulic Handbrake http://www.ozdat.com.au/forum/viewtopic.php?t=31321 |
Page 1 of 1 |
| Author: | birdirt [ Tue Jun 04, 2013 4:50 pm ] |
| Post subject: | Hydraulic Handbrake |
Gday Just wondering if putting in a hydraulic handbrake requires Engineering for rego? I'm in Canberra, I know each state is different, just wondering what experiences others have had? Thanks. |
|
| Author: | maddat [ Tue Jun 11, 2013 10:36 am ] |
| Post subject: | Re: Hydraulic Handbrake |
for rally rego no(10 years ago)but normal rego I would say yes, at a guess. |
|
| Author: | StanzaRallyMan [ Tue Jun 11, 2013 11:25 am ] |
| Post subject: | Re: Hydraulic Handbrake |
If you are changing the braking system to something it never came out with from the factory, then I cant see how you would not need an engineers certificate. |
|
| Author: | shirl72 [ Tue Jun 11, 2013 5:04 pm ] |
| Post subject: | Re: Hydraulic Handbrake |
Used to be the case in NSW that if the handbrake was part of the existing system it would not pass for rego so a few people i was rallying with used to run a seperate set of calipers and use a completely seperate system. From memory a master cylinder similar to what would be used on a trailer was mounted on the handbrake bracket. This solved the rego problem, but, was also 15 years ago so rules no doubt have changed. |
|
| Page 1 of 1 | All times are UTC+11:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|