OZDAT http://www.ozdat.com.au/forum/ |
|
New 1600 steel panels http://www.ozdat.com.au/forum/viewtopic.php?t=31692 |
Page 2 of 2 |
Author: | travm182 [ Wed Sep 04, 2013 7:55 pm ] | ||
Post subject: | Re: New 1600 steel panels | ||
Baz sells the bottom and top for $100 for both from memory.
The ones we supply are not the same as the original.Well $52 for the upper one and $48 for the lower it says on the website. We have been supplying this type for years. They have additional springs & a more secure latch mechanism. The original 1600 catches were notorious for releasing the bonnet. Many a datto owner has had the bonnet fly open with expensive results. Compare the catch in the pic to the one you have. http://www.datsport.com/body-bonnet-catch-lower.html Note that we are also supplying the new body panels, once we check them out. We did have a couple of the rear lamp panels & decided not to handle them. |
Author: | 1600 head [ Wed Sep 04, 2013 7:57 pm ] |
Post subject: | Re: New 1600 steel panels |
Very exciting. Keen to see your verdict on the finished products baz.. |
Author: | nick [ Fri Feb 28, 2014 11:04 pm ] |
Post subject: | Re: New 1600 steel panels |
Bonnets and guards now for sale on Ebay. Will be interesting to see fitment quality. Who's going to be the guinea pig?... |
Author: | chimp [ Sun Sep 25, 2016 10:42 pm ] |
Post subject: | Re: New 1600 steel panels |
I have purchased rear guards from All Muscle Parts for Datsun 1600's. The main body line is to wide and the lines to the beaver panel need reworking. if you have a pretty stuffed rear guard they are a good thing to use as a basic shape. The sills need a little bit of work as well, but are good. |
Author: | sutho510 [ Mon Sep 26, 2016 7:05 pm ] |
Post subject: | Re: New 1600 steel panels |
Its good to hear some feedback about these panels i have a few at home but haven't fitted them yet |
Author: | chimp [ Tue Sep 27, 2016 2:34 pm ] |
Post subject: | Re: New 1600 steel panels |
presently fitting a left rear quarter. It is a pain in the arse. Have had to cut and shut it to get anywhere near a nice fit. |
Author: | chimp [ Mon Nov 28, 2016 2:03 pm ] |
Post subject: | Re: New 1600 steel panels |
OK. So I purchased another 1600 rear quarter panel in the hope it would be better than the last one. ( I hoped the last one was just a one of problem). Sorry to say, it is just as bad. The box it came in is made better. |
Author: | sutho510 [ Mon Nov 28, 2016 6:38 pm ] |
Post subject: | Re: New 1600 steel panels |
Have you got any pictures of the problems |
Page 2 of 2 | All times are UTC+11:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |