| OZDAT http://www.ozdat.com.au/forum/ |
|
| Bosch alternator wiring http://www.ozdat.com.au/forum/viewtopic.php?t=31823 |
Page 1 of 1 |
| Author: | Nad015 [ Fri Oct 04, 2013 5:59 am ] |
| Post subject: | Bosch alternator wiring |
I'm Wiring in a used common internal reg bosch alternator(from stanza) to my 1600. I have a B+ terminal a D+ terminal. And another + small terminal. I have hooked up the main wire to the B+ and the lamp light wire to D+ terminal. But the dash charge light won't come on when the ignition in turned on and the alternator won't charge when I actually start the engine and have it running, But if I touch power to the D+ terminal, the alternator will kick in and start to charge. What am I missing?? |
|
| Author: | Nad015 [ Fri Oct 04, 2013 6:46 am ] |
| Post subject: | Re: Bosch alternator wiring |
Done a bit of digging around and the charge light needs a constant power to one side of it the other side goes to the alternator. And when the alternator isn't spinning it provides and earth and the light comes on. So I obviously have no constant power to my dash charge light, so I'll check that tonight. |
|
| Page 1 of 1 | All times are UTC+11:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|