The engine is nearing completion
![[ img ]](http://s397.photobucket.com/user/sss910_bucket/media/WP_20160422_17_10_25_Pro.jpg.html)
![[ img ]](http://s397.photobucket.com/user/sss910_bucket/media/WP_20160422_17_10_16_Pro.jpg.html)
![[ img ]](http://s397.photobucket.com/user/sss910_bucket/media/WP_20160422_17_03_02_Pro.jpg.html)
| OZDAT http://www.ozdat.com.au/forum/ |
|
| 1982 KP 910 SSS Z18S http://www.ozdat.com.au/forum/viewtopic.php?t=33165 |
Page 3 of 3 |
| Author: | sutho510 [ Wed Feb 17, 2016 9:47 pm ] |
| Post subject: | Re: 1982 KP 910 SSS Z18S |
They definately finish the job off nicely |
|
| Author: | BLUBRD [ Mon Apr 25, 2016 11:39 am ] |
| Post subject: | Re: 1982 KP 910 SSS Z18S |
The engine is nearing completion
|
|
| Author: | BLUBRD [ Sun Jun 26, 2016 1:38 pm ] |
| Post subject: | Re: 1982 KP 910 SSS Z18S |
Some more updates ![[ img ]](http://s397.photobucket.com/user/sss910_bucket/media/WP_20160506_16_52_21_Pro.jpg.html) ![[ img ]](http://s397.photobucket.com/user/sss910_bucket/media/WP_20160506_16_53_12_Pro.jpg.html) ![[ img ]](http://s397.photobucket.com/user/sss910_bucket/media/WP_20160518_17_31_00_Pro.jpg.html) ![[ img ]](http://s397.photobucket.com/user/sss910_bucket/media/WP_20160620_16_53_24_Pro.jpg.html) ![[ img ]](http://s397.photobucket.com/user/sss910_bucket/media/WP_20160620_16_53_16_Pro.jpg.html) ![[ img ]](http://s397.photobucket.com/user/sss910_bucket/media/WP_20160620_18_06_07_Pro.jpg.html)
|
|
| Author: | BLUBRD [ Sun Jun 26, 2016 1:41 pm ] |
| Post subject: | Re: 1982 KP 910 SSS Z18S |
A few little teething problems , has had a few little drives but the carby needs attention again ... once thats sorted i can start on the run in and then finish her off by re applying the side moulds and badges |
|
| Author: | green200b [ Sun Jun 26, 2016 4:22 pm ] |
| Post subject: | Re: 1982 KP 910 SSS Z18S |
That looks awesome. You have obviously gone to a lot of effort here and the result is very good 
|
|
| Author: | BLUBRD [ Wed Apr 26, 2017 5:04 pm ] |
| Post subject: | Re: 1982 KP 910 SSS Z18S |
Been a while since ive updated this . Car is run in have done a trip to melbourne for datsun day last year , sydney datsun day and NDN 17 this easter . So far has been good apart from a fuel pump failure and a coil its been purring along .. found a new exhaust manifold via friends in SA and had it ceramic coated and fitted that up just need to finish the AC .. some more pics ![[ img ]](http://s397.photobucket.com/user/sss910_bucket/media/20161020_154814.jpg.html) ![[ img ]](http://s397.photobucket.com/user/sss910_bucket/media/20161121_124501.jpg.html) This shows the differences quite well between the pillarless and sedan bodies ![[ img ]](http://s397.photobucket.com/user/sss910_bucket/media/20161120_144458.jpg.html) In Melbourne for the Yarra Glen show ![[ img ]](http://s397.photobucket.com/user/sss910_bucket/media/20170211_195856.jpg.html) New manifold and heat shield fitted ![[ img ]](http://s397.photobucket.com/user/sss910_bucket/media/20170418_143042.jpg.html) Unleashing the 70kws at NDN17 eastern creek |
|
| Author: | sutho510 [ Wed Apr 26, 2017 10:11 pm ] |
| Post subject: | Re: 1982 KP 910 SSS Z18S |
Hey pete why had the old manifold snapped? |
|
| Author: | RJB510 [ Wed Apr 26, 2017 10:55 pm ] |
| Post subject: | Re: 1982 KP 910 SSS Z18S |
I thought i saw this at the NDN17 rego's. Aaron might have had a crack at you when i was there saying that you keep taking all his bluebird trophies!? |
|
| Author: | BLUBRD [ Thu Apr 27, 2017 6:58 pm ] |
| Post subject: | Re: 1982 KP 910 SSS Z18S |
Adam the old manifold was cracked all the way around , has had a few repairs and looked nasty Aaron had a good crack at the wet skid pan motorkana and took out first place ... if only i had that extra 9 kws he has over me 
|
|
| Author: | Dave [ Thu Apr 27, 2017 9:54 pm ] |
| Post subject: | Re: 1982 KP 910 SSS Z18S |
I believe the trophy count ended up even at Aaron 1 vs Pete 1. Show'n'shine judges were very impressed with the bluebird. |
|
| Page 3 of 3 | All times are UTC+11:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|