OZDAT http://www.ozdat.com.au/forum/ |
|
Datsun Dyno Day early 2015? Ballarat http://www.ozdat.com.au/forum/viewtopic.php?t=33371 |
Page 2 of 6 |
Author: | unfamilia [ Sat Dec 13, 2014 2:37 pm ] |
Post subject: | Re: Datsun Dyno Day early 2015? Ballarat |
I'm in. Mrs gave seal of approval! Put me down for both even though unturned let's just go easy on me Hope I can get l16 back in by then. Will be good to compare when was in the 1200 on lpg http://youtu.be/OwoSt5gtOsM I'm getting in the mood for love |
Author: | Rat Dat [ Sat Dec 13, 2014 3:14 pm ] |
Post subject: | Re: Datsun Dyno Day early 2015? Ballarat |
The 1600 has a L16 with wade 72 degree can and hd valve springs etc but on running a weber 32/36 carby unfortunately. Engine was built to run quad throttle bodies and EFI but all that was removed before we bought the car |
Author: | trb012 [ Sat Dec 13, 2014 3:17 pm ] |
Post subject: | Re: Datsun Dyno Day early 2015? Ballarat |
Im in if moved to a later date you know the setup Simo |
Author: | unfamilia [ Sat Dec 13, 2014 3:30 pm ] |
Post subject: | Re: Datsun Dyno Day early 2015? Ballarat |
Ballarat has a great hospital stu. Tell the Mrs it's like a romantic getaway |
Author: | unfamilia [ Mon Dec 15, 2014 9:49 pm ] |
Post subject: | Re: Datsun Dyno Day early 2015? Ballarat |
Simon Adrian / boofhead say it's a yes from him In the feral errol prepped a 12 1200 sedan twin Webbers |
Author: | sbthomo [ Thu Dec 18, 2014 10:27 pm ] |
Post subject: | Re: Datsun Dyno Day early 2015? Ballarat |
Count me in Simon. Sounds like a bit of fun. |
Author: | sikyne [ Thu Dec 18, 2014 10:56 pm ] |
Post subject: | Re: Datsun Dyno Day early 2015? Ballarat |
cool, you going to bring the 1600? I'll put you on the list. I fired up the 260Z for the first time in 8+ years yesterday. I'd forgotten how good it sounds. If we don't get a full quota of cars I might run that one up as well. I'll put myself on the bottom of the list(happy to be bumped off). |
Author: | green200b [ Fri Dec 19, 2014 9:38 am ] |
Post subject: | Re: Datsun Dyno Day early 2015? Ballarat |
Add me to the list. Not sure what I'll be in though. Don't have a registered Datsun, the RX-7 won't be very exciting, the RX-2 won't be turbo yet, maybe the Hilux...so if anyone wants a car towed up from Melbourne I'll do it provided you supply the trailer |
Author: | SR20Datsun [ Fri Dec 19, 2014 3:13 pm ] |
Post subject: | Re: Datsun Dyno Day early 2015? Ballarat |
I'd be keen on this, but I don't think my car will have a rear end in it!! Trying to get it finished ASAP... |
Author: | sikyne [ Sat Dec 20, 2014 10:25 am ] |
Post subject: | Re: Datsun Dyno Day early 2015? Ballarat |
Hi Green200b, That's great, i'll put you on the list. I'd like to give the Datto's priority on the day, but we should have time to give the Hilux a run. |
Author: | green200b [ Sat Dec 20, 2014 6:18 pm ] |
Post subject: | Re: Datsun Dyno Day early 2015? Ballarat |
No problem, I'd rather not know the embarrassing figure this thing will make. So I'd rather see Datsuns on there too. At that price I'll bring a car up and will run it on the dyno if there's time |
Author: | unfamilia [ Sat Dec 20, 2014 7:37 pm ] |
Post subject: | Re: Datsun Dyno Day early 2015? Ballarat |
Start a trend al. Take the chev badge off and put a datsun one on |
Author: | sikyne [ Mon Jan 05, 2015 9:01 am ] |
Post subject: | Re: Datsun Dyno Day early 2015? Ballarat |
About 6 weeks to go. Still room on the list and Still plenty of time to get cars back together! |
Author: | unfamilia [ Mon Jan 05, 2015 10:11 am ] |
Post subject: | Re: Datsun Dyno Day early 2015? Ballarat |
My cars readyish it's all back together and running. really needs a tune Feels like it goes better with the old l16 too. Can compare petrol and carbs to what it was in lpg now (hoping not to be embarrassed lol) |
Author: | trb012 [ Mon Jan 05, 2015 10:44 am ] |
Post subject: | Re: Datsun Dyno Day early 2015? Ballarat |
Got my brother in laws engagement party the same day now so will have to come next time |
Page 2 of 6 | All times are UTC+11:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |