OZDAT
http://www.ozdat.com.au/forum/

My '71 P510 sedan build
http://www.ozdat.com.au/forum/viewtopic.php?t=33512		 Page 2 of 3
Author:  Azzdat16 [ Fri Feb 13, 2015 6:50 pm ]
Post subject:  Re: My '71 P510 sedan build
What did you use for the sound deadening on the cabin side of the firewall?
Author:  hailest [ Fri Feb 13, 2015 8:13 pm ]
Post subject:  Re: My '71 P510 sedan build
Hey mate,

Nice build & good luck with it all. (Personal opinion) I think about 200KW ATW is a great number to aim for in the datto's lots of fun whilst not being over the top. Not too hard to achieve that number either.

Cheers,

Trent
Author:  577ftg [ Sun Feb 15, 2015 12:06 pm ]
Post subject:  Re: My '71 P510 sedan build
The insulation is a foam composite with an aluminium backing, self adhesive on the other side and very light. Bought it of ebay from overseas. Seller was great with fast post and excellent communication ( I got this before I got stuff bought from an Aussie seller!!! ). Honestly its probably supposed to go on the outside of the firewall but....... I've got some butyl rubber for the floor and under the seats.
Thanks Trent. Just a nice driveable, angry when I want it to be, car will be the aim.
Author:  domtag [ Wed Nov 18, 2015 10:32 am ]
Post subject:  Re: My '71 P510 sedan build
Looks great fella!!! Its great to see another CA 1600 makes me want to hook in to mine and get it on the road.
Author:  577ftg [ Sun Apr 02, 2017 11:03 pm ]
Post subject:  Re: My '71 P510 sedan build
AND in comes the post from the dead...LOL.

Been a fair while but now the old girl is sitting on my rotisserie at 30 degrees. Has been so long because I had to make the rotisserie up. Will post some pics soon.
Author:  577ftg [ Sun Apr 09, 2017 7:21 pm ]
Post subject:  Re: My '71 P510 sedan build
Will add some more next weekend.

Attachments:
File comment: Swinging on the rotisserie
[ attachment ]
20170328_005117814_iOS.jpg [ 1.96 MiB | Viewed 5681 times ]
File comment: New LH boot drop off fitted
[ attachment ]
20150203_031448431_iOS.jpg [ 1.98 MiB | Viewed 5681 times ]
File comment: Cross member exhaust hole mod.
[ attachment ]
20150119_025722855_iOS.jpg [ 1.47 MiB | Viewed 5681 times ]
File comment: Halfway made rotisserie
[ attachment ]
20150917_042507554_iOS.jpg [ 1.39 MiB | Viewed 5681 times ]
Author:  J1mm1e [ Tue Apr 11, 2017 9:26 pm ]
Post subject:  Re: My '71 P510 sedan build
The new boot drop off looks good as new, is that from australian panel craft? I'm interested to see how it looks once you get the quarter panel back on there! Keep the pics coming.
Author:  577ftg [ Mon Apr 17, 2017 6:12 pm ]
Post subject:  Re: My '71 P510 sedan build
Honestly I can't remember. I know I got bottom rear quarters and boot drop offs and I purchased either or from APC or Muscle Car Parts Australia (yes it has been that long since I got them).
Author:  577ftg [ Mon Apr 17, 2017 6:18 pm ]
Post subject:  Re: My '71 P510 sedan build
Some more pics....

Attachments:
File comment: Before taking the plunge and fitting the patch panel.
[ attachment ]
20170328_005117814_iOS.jpg [ 1.96 MiB | Viewed 5645 times ]
File comment: Trial fitting the quarter panel patch
[ attachment ]
20170320_054803826_iOS.jpg [ 1.61 MiB | Viewed 5646 times ]
Author:  577ftg [ Tue Apr 18, 2017 3:39 pm ]
Post subject:  Re: My '71 P510 sedan build
With the patch panel on. The back bit requires some adjustments but I'll get there.

Attachments:
File comment: Panel on, apart from the back bit
[ attachment ]
20170407_063011946_iOS.jpg [ 1.66 MiB | Viewed 5638 times ]
Author:  577ftg [ Tue Apr 18, 2017 3:41 pm ]
Post subject:  Re: My '71 P510 sedan build
The engine

Attachments:
File comment: The powerplant
[ attachment ]
20170327_063702406_iOS.jpg [ 1.99 MiB | Viewed 5638 times ]
Author:  RJB510 [ Tue Apr 18, 2017 10:54 pm ]
Post subject:  Re: My '71 P510 sedan build
Yay for progress! time to crack back into it. How did you make your rotisserie? similar to the one I made?
Author:  577ftg [ Wed Apr 19, 2017 1:04 pm ]
Post subject:  Re: My '71 P510 sedan build
Got the plans free off of good old Google. 'Redwing' I think it was called. A fair bit of overkill for such a light car but..... I could have lashed out and got the hydraulic cylinders that were on the plans but that money can by car parts. And a scissor jack and some off cut steel do the job.
Author:  nicem8 [ Wed Apr 19, 2017 8:18 pm ]
Post subject:  Re: My '71 P510 sedan build
some things take time to get them right, looks good and good luck with it

norm
Author:  RJB510 [ Wed Apr 19, 2017 9:06 pm ]
Post subject:  Re: My '71 P510 sedan build
I made mine with off cuts and a trolley jack also. Worked perfectly fine. Best way to do a resto!
Page 2 of 3 All times are UTC+11:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/